Adds `Coder.StepLength`, a Vale `script` rule for [Keep steps short](https://github.com/coder/coder/blob/main/docs/.style/style-guide/procedural-writing.md#keep-steps-short). It flags an ordered-list step whose instruction, the step's first paragraph, has more than 20 words, counted as [How to count words](https://github.com/coder/coder/blob/main/docs/.style/style-guide/voice-and-tone.md#how-to-count-words) describes. Paragraphs below the instruction explain the step and aren't counted. - Severity: `warning`. - Scope: `docs/**` except `docs/.style/style-guide/**`. - Baseline: 124 findings in 60 hand-written files. The cleanup shortens each long instruction, moves its explanation into one paragraph below it, or splits a step that holds several actions. After cleanup `vale docs/` reports 0 `Coder.StepLength` findings, and the other rules report no new findings on the changed files. - The guide section now says the limit covers the instruction, and that one action or one explanation must not be broken across paragraphs to meet it. - Generated pages (`docs/reference/{api,cli,agent-api}`, `configuration-reference.md`, `prometheus.md`): no findings, so no `.vale.ini` exclusion is needed. Linear: DOCS-1272 <details><summary>Decision log</summary> **Review change (Ian's review)** - The first version limited every paragraph of a step to 20 words. The cleanup for it chopped explanations into several short paragraphs, which made steps harder to read and sometimes changed their meaning. - The rule now counts only the first paragraph segment of each step. The content files were reset to `main` and the cleanup was redone against the narrower rule. - Cleanup preferences, in order: shorten the instruction; keep a short instruction and put the explanation, with its original wording, in one paragraph below it; split a step into one step for each action; for descriptive lists (such as "How it works"), keep each item one statement. - `docs/admin/users/oidc-auth/microsoft.md` keeps the split into separate steps, with Ian's wording suggestions applied. "click" became "select" in step 16 because `Coder.SelectClick` flags it. **Rule shape** - A `script` rule (Tengo) with `scope: raw`, because the count depends on Markdown structure that per-paragraph scopes hide. - A step is an ordered-list item with a `1.` or `1)` marker. A nested ordered item is its own step. Bullets, even under a step, are not steps. - The instruction ends at a blank line, a fence, a nested list, a table row, a blockquote, block-level HTML, or an explicit hard break (`<br>`, a trailing backslash, or two trailing spaces). - Fenced code blocks, HTML comments, tables, images, and nested bullets add no words. - CRLF: `\r` counts as whitespace, and offsets come from the raw text. **Counting approximations (also in the rule header)** - A code span and a `**bold**` or `__bold__` span are one word each. - Words split on whitespace, so a hyphenated compound and `30 seconds` are one word. - Link text counts word by word, destinations are skipped, images add no words, and `<https://...>` autolinks are one word. - A token with no letter or digit, such as the `>` in `**A** > **B**`, is not a word. - Tengo indexes strings by rune but measures them in bytes, so the script rewrites each non-ASCII rune to ASCII of the same byte length first. **Tests** (fixtures under `/tmp/sltest/`, not committed; run with the repo `.vale.ini`, LF and CRLF) - Flagged: a long instruction, a short action and a long result in one paragraph, a long nested ordered step. - Not flagged: a long paragraph below a short instruction, text after a `<br>` hard break, a long paragraph after a code block, a long nested bullet. - LF and CRLF output is identical. - Pre-commit hooks (`fmt/markdown`, `lint/markdown`, `lint/emdash`, `lint/style-claims`, `lint/typos`) pass. - Not run on Windows or macOS. The rule is plain text processing, and the CRLF cases simulate Windows line endings on Linux. </details> *Generated by [Coder Agents](https://coder.com/docs/ai-coder/agents) on behalf of @nickvigilante.*
4.4 KiB
title
| title |
|---|
| How to use Apache as a reverse proxy with Let's Encrypt |
Requirements
-
Start a Coder deployment and be sure to set the following configuration values:
CODER_HTTP_ADDRESS=127.0.0.1:3000 CODER_ACCESS_URL=https://coder.example.com CODER_WILDCARD_ACCESS_URL=*coder.example.comThroughout the guide, be sure to replace
coder.example.comwith the domain you intend to use with Coder. -
Configure your DNS provider to point your coder.example.com and
*.coder.example.comto your server's public IP address.For example, to use
coder.example.comas your subdomain, configurecoder.example.comand*.coder.example.comto point to your server's public ip. This can be done by adding A records in your DNS provider's dashboard. -
Install Apache (assuming you're on Debian/Ubuntu):
sudo apt install apache2 -
Enable the following Apache modules:
sudo a2enmod proxy sudo a2enmod proxy_http sudo a2enmod ssl sudo a2enmod rewrite -
Stop Apache service and disable default site:
sudo a2dissite 000-default.conf sudo systemctl stop apache2
Install and configure LetsEncrypt Certbot
-
Install LetsEncrypt Certbot: Refer to the CertBot documentation.
Be sure to pick the wildcard tab and select your DNS provider for instructions to install the necessary DNS plugin.
Create DNS provider credentials
This example assumes you're using CloudFlare as your DNS provider. For other providers, refer to the CertBot documentation.
-
Create an API token for the DNS provider you're using, for example, CloudFlare with the following permissions:
- Zone - DNS - Edit
-
Create a file in
.secrets/certbot/cloudflare.iniwith the following content:dns_cloudflare_api_token = YOUR_API_TOKENmkdir -p ~/.secrets/certbot touch ~/.secrets/certbot/cloudflare.ini nano ~/.secrets/certbot/cloudflare.ini -
Set the correct permissions:
sudo chmod 600 ~/.secrets/certbot/cloudflare.ini
Create the certificate
-
Create the wildcard certificate:
sudo certbot certonly --dns-cloudflare --dns-cloudflare-credentials ~/.secrets/certbot/cloudflare.ini -d coder.example.com -d *.coder.example.com
Configure Apache
This example assumes Coder is running locally on 127.0.0.1:3000 and that you're using coder.example.com as your subdomain.
-
Create Apache configuration for Coder:
sudo nano /etc/apache2/sites-available/coder.conf -
Add the following content:
# Redirect HTTP to HTTPS <VirtualHost *:80> ServerName coder.example.com ServerAlias *.coder.example.com Redirect permanent / https://coder.example.com/ </VirtualHost> <VirtualHost *:443> ServerName coder.example.com ServerAlias *.coder.example.com ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined ProxyPass / http://127.0.0.1:3000/ upgrade=any # required for websockets ProxyPassReverse / http://127.0.0.1:3000/ ProxyRequests Off ProxyPreserveHost On RewriteEngine On # Websockets are required for workspace connectivity RewriteCond %{HTTP:Connection} Upgrade [NC] RewriteCond %{HTTP:Upgrade} websocket [NC] RewriteRule /(.*) ws://127.0.0.1:3000/$1 [P,L] SSLCertificateFile /etc/letsencrypt/live/coder.example.com/fullchain.pem SSLCertificateKeyFile /etc/letsencrypt/live/coder.example.com/privkey.pem </VirtualHost>Do not forget to change:
coder.example.comby your (sub)domain -
Enable the site:
sudo a2ensite coder.conf -
Restart Apache:
sudo systemctl restart apache2
Refresh certificates automatically
-
Create a new file in
/etc/cron.weekly:sudo touch /etc/cron.weekly/certbot -
Make it executable:
sudo chmod +x /etc/cron.weekly/certbot -
And add this code:
#!/bin/sh sudo certbot renew -q
And that's it, you should now be able to access Coder at your sub(domain), for example, https://coder.example.com.