Commit Graph
775 Commits
Author SHA1 Message Date
Thomas Kosiewski a3fbd2384d feat: add the Agents automations list page and chat-list automation filter (#30171)
Closes CODAGT-1213. Part of CODAGT-1135 (Automations for Coder Agents,
RFC step 7).

Adds an Automations list to the Agents UI and an `automation_id` filter
on the chat list, so users can see their automations and find the chats
an automation created or wrote to.

## Changes

- **Chat-list filter:** `GET /api/v2/chats?automation_id=<uuid>` returns
root chats whose `chats.automation_id` matches (chats the automation
created) and chats with a non-deleted message whose
`chat_messages.automation_id` matches (chats it wrote to). The nil UUID
is rejected, because the query uses it as "no filter". It is honored
only when the `chat-automations` experiment is on for the caller;
otherwise it is ignored, as the RFC says, and the evaluator runs only
when the parameter is present. Chat authorization is unchanged. Swagger
documents the parameter, and `codersdk.ListChatsOptions` gains
`AutomationID`. The existing partial indexes back the filter.
- **List page:** `/agents/automations`, with an **Automations** sidebar
entry. Both are hidden when the experiment is off for the viewer
(per-user experiment list). The page lists the automations of the
organization selected in the Agents organization picker; it shares the
stored selection with the new-chat form and has its own picker. Columns:
name (with the creating chat for agent-created automations), trigger
(cron and time zone, or webhook single or multi use), target (chat link,
"New chat each run", or a **Missing target** badge for a deleted or
archived target), next run from the server's `next_run_times`, an
enabled switch (PATCH; a non-owner cannot re-enable), **Run now** (owner
only, schedules only, disabled for a missing target and while another
run is pending), and **View chats** (owner only; a paged dialog backed
by the new filter). Chat titles are looked up only for the viewer's own
automations. The list refetches every minute so the next run stays
current. On mobile, the chats header links to the page, which opens full
width with a back link. A Run now failure, such as `409` for a busy chat
with skip or `429` for a full queue or share, shows the server message
in an alert above the table.
- Out of scope, per the ticket: the **Last skipped run** column, and the
editor (CODAGT-1214). The empty state points to the API because the
`manage_automations` tool is not in this stack yet.

## Validation

- Go: `TestListChats/AutomationFilter` covers:
- created and written-to chats, deleted messages, and another user's
chat;
  - an unknown id, a malformed id (`400`), and the nil UUID (`400`);
- the experiment turned off by a per-user rule, where the parameter is
ignored, including a malformed id.
- Vitest (`AgentAutomationsPage.test.tsx`), all asserting requests:
- the selected organization's list is requested, and switching the
picker refetches and stores the choice;
  - the switch sends `PATCH {enabled:false}`;
  - Run now sends its POST when the server answers `409` or `429`;
- View chats requests `?automation_id=`, and Load more requests the next
page;
  - nothing is requested with the experiment off.
- Storybook (Pixel): `WithAutomations`, `OtherOwner`, `Empty`,
`MissingTarget`, `RunNowError`, `ChatsDialog`,
`ChatsDialogLoadMoreError`, `Loading`, `RefetchError`, `ListError`, and
`ChatsSidebar/MobileWithAutomations`.
- Remote dogfood UAT: PASS in round 1 (`fa60a15767`) and round 2 on the
current head `b37e9d99d0`. Round 2 repeated every criterion and verified
the review fixes. Screenshots are in the comments below.
- `coder-frontend-review` self-review: every role passes after fixes on
each update, except two items:
- the experiment-off test waits for the not-found page only as a sync
point before asserting that no request was sent;
- there is no story for a chat-title lookup error, because the Storybook
query helper cannot inject errors.
- Codex review: 4 rounds (8, 4, 4 and 6 P2 findings, no P0 or P1).
- Rounds 1 to 3 were fixed, except the model-availability item
(CODAGT-1244).
- Round 4 found no blocker and is tracked in CODAGT-1246, together with
the minor UAT round 2 findings.
- All threads are resolved. There is no clean Codex verdict on the
current head. Further rounds were not requested because findings were
not converging and none was a blocker; the stack orchestrator accepted
stopping at round 4.
- CI: `ci` run 36703512580, started with workflow_dispatch, is green on
the current head `b37e9d99d0`. Pushes to existing stacked PRs did not
start the pull_request `ci` run (noted in the comments). The earlier
head `8f2ee30d8f` was green through a normal pull_request run.

Size: about 1,370 hand-written lines (about 560 of them tests and
stories), plus generated code. This is over the 1,000-line guideline,
mostly from review fixes.

## Stack

Stacked on #30085, #30096, #30112, #30117, #30127, #30134, #30160,
#30166 and #30167 (CODAGT-1215). Base:
`tk/codagt-1215-automations-chat-labels`, merged in (not rebased).
Follow-ups: CODAGT-1244, CODAGT-1246.

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_
2026-10-02 15:54:53 +00:00
Thomas Kosiewski b96f1b970c feat: label automation messages in agent chats (#30167)
Closes CODAGT-1215. Part of CODAGT-1135 (Automations for Coder Agents,
RFC step 9).

Chat messages and queued inputs delivered by a chat automation (webhook,
schedule, Run now) now show a label: `Automation run · <automation name>
· input <first 8 chars of input ID>`. A tooltip holds the full
automation and input IDs. While names load, the label omits the name
part. When the name cannot be resolved (deleted automation, a
shared-chat viewer who cannot read it, or experiment off), the label
shows the automation ID instead. Ordinary messages have no label.

## Changes

- **Backend (minimal, SDK exposure only):** `codersdk.ChatMessage` and
`codersdk.ChatQueuedMessage` gain `automation_id` and `input_id`
(omitted when unset). `db2sdk` fills them from the existing columns, so
REST messages and the stream `message` and `queue_update` events carry
them. No behavior change in the lower layers.
- **Frontend:** `API.experimental.getChatAutomations`, a
`chatAutomations` query, and `useChatAutomationNames`. The hook fetches
`GET /api/experimental/organizations/{org}/chat-automations` only when
the user-scoped `chat-automations` experiment is on and the chat holds
automation input. The `AutomationLabel` component uses the shared
`Badge` and `Tooltip`, and is wired into `ConversationTimeline`
(history) and `QueuedMessagesList` (queue). The chat store refetches
names when new automation input arrives, so automations created or
renamed after page load show their current name.
- Out of scope, per the ticket: the occurrence label and the
requested-versus-resolved effort display.

## Validation

- Vitest: the automations list is requested for the chat's organization
only when the chat holds automation input and the experiment is on;
`useChatAutomationNames` reports loading until the list resolves and
then maps IDs to names; the chat store refetches names on new live
automation input. Go: `TestChatMessageAutomationProvenance` for both
converters.
- Storybook (Pixel): `ConversationTimeline/AutomationUserMessages` and
`QueuedMessagesList/AutomationMessages` (named, deleted by ID, long name
at phone width, no label on ordinary items) and
`QueuedMessagesList/AutomationMessagesLoading` (name still loading: no
UUID flash).
- Remote dogfood UAT on a develop.sh instance with the experiment on:
PASS in round 2. It covered webhook input in an existing chat (history
and queue), a schedule, a new_chat first message, the ID fallback after
deletion, and no label on ordinary messages. Screenshots are in a
comment below. Run now was not on the base branch during UAT; it uses
the same fields and path.
- coder-frontend-review self-review: all roles PASS, after fixes on each
update.

## Known limitations (follow-ups under CODAGT-1135)

- A shared-chat viewer who does not own the automation sees its ID,
because automation RBAC has no chat ACL (CODAGT-1239).
- Copying the label text yields three lines, because the name span
truncates separately (CODAGT-1238).

## Stack

Stacked on #30085, #30096, #30112, #30117, #30127, #30134, #30160 (1211
7a) and #30166 (1211 7b). Base: `tk/codagt-1211b-automations-run-now`.

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_

---------

Signed-off-by: Thomas Kosiewski <tk@coder.com>
2026-10-02 15:54:53 +00:00
Thomas Kosiewski b25f8859f2 feat: add Run now for schedule chat automations (#30166)
Closes CODAGT-1211. Part of CODAGT-1135.

> Stack: PR 7b of "Automations for Coder Agents", on top of 7a (#30160,
the schedule scanner), which sits on 1210 5b (#30134).

Adds Run now for schedule automations: `POST
/api/experimental/organizations/{organization}/chat-automations/{automation}/runs`
publishes the saved prompt at once through the existing `Publish` path,
with no occurrence. It never writes the automation row, so the schedule
cursor and revision stay unchanged.

- **Owner-only.** `chatd.RunAutomation(ctx, actorID, id)` compares the
caller with the automation owner before anything else, so org admins and
site owners get 403 even though dbauthz lets them read and write the row
(CODAGT-1226). A user who cannot read the automation gets 404, and the
route sits behind the experiment gate, so a caller with
`chat-automations` off gets 404. `Publish` also checks the owner's
experiment again.
- **Statuses.** 202 with `input_id` and `chat_id`; 400 for a
non-schedule automation; 409 for a disabled schedule, a busy chat with
When busy `skip`, or an unavailable target or model; 429 when the chat
queue or the automations' share of it is full; hook denials use the same
response as chat messages.
- **new_chat.** A Run now of a new_chat schedule creates a chat titled
with the run time in the schedule's time zone and records the same audit
entry as webhook-created chats.

## Tests

`coderd/exp_chat_automation_runs_test.go` runs against a real coderdtest
server: the owner's run saves one message with the returned input id and
leaves the whole automation row byte-equal; org admin and site owner get
403 (also on a webhook automation, proving the owner check comes first)
and a non-reader gets 404, with nothing saved; webhook 400, disabled
409, busy `skip` 409, queue share 429; new_chat title, owner, and audit
entry. The experiment gate test covers the new route.

Dogfood UAT ran on a real dev instance through Coder Agents and passed:
immediate publish with the cursor and revision unchanged, 409/429
refusals, 403 for an org admin and the site owner, 404 with the
experiment off, and a one-minute schedule that kept one message per
minute around a Run now.

## Size

About 325 hand-written lines (about 190 of them tests). Generated:
`coderd/apidoc/docs.go`, `coderd/apidoc/swagger.json`,
`docs/reference/api/schemas.md`, `site/src/api/typesGenerated.ts` (213
lines).

ARCHITECTURE.md prose was drafted by an agent at the user's request; the
user will review it.

Also replaces the CODAGT-1209 ARCHITECTURE.md TODO from #30117; the
prose was drafted by an agent at the user's request, and the user will
review it.

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_
2026-10-02 15:54:52 +00:00
Thomas Kosiewski b517db4beb feat: deliver webhook events to existing chats through chat automations (#30127)
Part of CODAGT-1210 (1 of 2). Part of CODAGT-1135.

> Stack: PR 5 of "Automations for Coder Agents", on top of #30117. The
ticket is split in two by operation: this PR delivers webhook events to
`existing_chat` targets; the stacked follow-up delivers them to
`new_chat` targets and closes CODAGT-1210. Until then a `new_chat`
automation's events endpoint answers `501`.

## What this adds

- `POST /api/experimental/chat-automations/{automation}/events`.
External systems send the automation's webhook secret as `Authorization:
Bearer <secret>` and a JSON body of at most 256 KiB. The route has no
API key middleware and sits outside the `/api/experimental` group,
behind its own rate limiter keyed by caller and a fixed endpoint key (IP
address for unauthenticated callers), so varying the automation id does
not reset the budget.
- Secret check: SHA-256 of the bearer value, compared in constant time.
Unknown ids, other kinds, and wrong secrets all get the same `401`. The
`chat-automations` experiment is checked for the automation owner only
after the secret matches (`404` when off). The body is then read: over
the limit `413`, not JSON `400`.
- `chatd.PublishAutomationWebhook` sends as the owner (`dbauthz.As` with
the owner's subject) through `SendMessage` with the `queue` busy
behavior set explicitly, so automations never interrupt or steer.
`user_prompt_submit` hooks run first: a denial is `403`, an unreachable
hook service `502`.
- One admission check runs before the send (so refused events never
reach hooks) and again in the `AdmitInTx` callback, which locks the
automation together with the chat's queued automations in one
ascending-order call. Under the lock it rechecks: enabled, secret
version (a request verified before a rotation but committed after it
gets `401`), single-use state, target chat (root chat of the owner, same
org, not archived), owner status, and the owner's `chat:update`
permission. It then applies **When busy**: `skip` refuses a busy chat
(`409`), `queue` refuses input beyond the automations' share, half the
chat queue cap rounded down and at least 1 (`429`); busy and the share
count only queued rows that promotion would still deliver. It marks a
single-use webhook consumed and returns the provenance.
- The message has two parts: the saved prompt, and a labeled part with
the body as untrusted event data inside `<automation_event_data>` tags.
`json.HTMLEscape` escapes `<`, `>`, and `&` in the body, which keeps the
JSON value and makes the closing tag impossible to forge.
- `chatd.Config.Authorizer` (wired from `options.Authorizer`) for the
explicit owner checks; publishing fails closed without one.
- New query `ConsumeChatAutomationWebhookByID` with a dbauthz wrapper.

Status codes follow the RFC's failure outcomes table; the
chat-without-a-model case returns the same `400` as a person's message.

## Notes for reviewers

- Single-use consumption runs from the chatd publish code as the owner,
because the chatd role only reads `chat_automation`. No lower-layer RBAC
change.
- ARCHITECTURE.md prose was drafted by an agent at the user's request;
the user will review it.
- Size: about 1,460 hand-written lines after review fixes (about 770 of
them tests), over the ~1,000 budget because of the review hardening.
Generated: about 360 lines (`coderd/apidoc`, `dbmock`, `dbmetrics`,
`querier.go`, `queries.sql.go`, `docs/reference/api/schemas.md`,
`typesGenerated.ts`).
- Dogfood UAT ran through Coder Agents on a real dev deployment with
curl deliveries. Round 1 found error-mapping defects, fixed here; rounds
2 and 3 passed, the last on the final code (the head after it changes
only ARCHITECTURE.md).
- Deferred: CODAGT-1233 (stale automation rows filling the physical
queue cap; lower-layer `SendMessage` path).

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_
2026-10-02 15:54:51 +00:00
Thomas Kosiewski 5c1662ea4c feat: disable, re-enable, and rotate chat automations with schedule preview (#30117)
Completes the chat automations management API from RFC step 3: disable
and re-enable, delete that disables first, webhook secret rotation, and
a server-side schedule preview. Stacked on #30112.

- **Disable** (`PATCH` with `{"enabled": false}`) runs in two steps. A
short transaction that touches only the automation row sets `enabled =
false` and increments `queue_generation`, the cutoff. After it commits,
the automation's queued rows below the cutoff are deleted one chat at a
time through chatd's existing `DeleteQueued` transition, run as chatd,
so queue versions and stream updates match a manual delete. If a row is
missed, for example after a crash between the steps, the queue promotion
guard from #30096 discards it, because its generation is stale. Running
turns are not interrupted.
- **Delete** deletes the row and then removes all of the automation's
queued rows the same way. Deleting the row is itself the cutoff, because
the promotion guard discards rows whose automation no longer exists. So
delete needs only delete permission, not update. This differs from the
RFC's "disable, then delete" order, with the same outcome.
- **Re-enable** (`{"enabled": true}`) moves a schedule's cursor to the
next future cron time, so the disabled period is not replayed. The
generation never resets.
- **Permissions:** only the owner can enable, edit, or rotate.
Organization admins and site owners can send exactly `{"enabled":
false}` (anything combined with it is 403), and can still list, read,
and delete.
- **Rotation:** `POST .../chat-automations/{automation}/secret/rotate`
(owner only, webhooks only) returns the new secret once and increments
`webhook_secret_version`. Only the SHA-256 hash is stored, and the
rotation is audited with the hash redacted.
- **Preview:** `POST .../chat-automations/schedule-preview` evaluates an
unsaved cron expression and time zone with create's rules and returns
the next five run times, or 400.
- `coderd/x/chatd/ARCHITECTURE.md` gets a `TODO (CODAGT-1209)` note
about disable using the delete-queued transition. **Author action before
merge:** replace that TODO with the architecture prose (agents do not
write that document).

Known gap, tracked in CODAGT-1227: when the target chat is archived,
disable and delete cannot remove its queued automation rows, because
`DeleteQueuedMessage` is not allowed from archived states. The rows
never run, since the promotion guard discards them, but they stay
visible after the chat is unarchived. The fix needs a chatstate
transition from the lower layer.

Dogfood UAT ran on a real dev instance and passed. It covered disable
removing only that automation's queued rows (the chat API agreed),
delete, re-enable without replay, the permission matrix for an
organization admin and the site owner, rotation (the stored hash matches
the new secret, and neither secret appears in get or list), preview, and
a runtime experiment rule. It also checked that a leftover row is
discarded on promotion.

Closes CODAGT-1209
Part of CODAGT-1135
Refs CODAGT-1217

Stack: PR 3b of the Automations for Coder Agents stack, on top of #30112
(PR 3a), #30096, and #30085.

> This PR was written by an AI agent (xum) and reviewed by the agent's
own test audit and UAT. A human has not reviewed it yet.

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_

---------

Signed-off-by: Thomas Kosiewski <tk@coder.com>
2026-10-02 15:54:50 +00:00
Thomas Kosiewski 9316d67440 feat: add chat automations management API behind chat-automations (#30112)
Adds the management API for chat automations under
`/api/experimental/organizations/{organization}/chat-automations`,
behind the new user-scoped `chat-automations` experiment. This is the
first of two PRs for RFC step 3; nothing publishes automation messages
yet.

- **Experiment:** `chat-automations` is in `ExperimentsKnown`,
`ExperimentsUserScoped`, and the ruleguard list in `scripts/rules.go`.
Every route asks `chatd.AutomationsEnabled(ctx, api.ExperimentEvaluator,
callerID)`, which fails closed on a missing subject or evaluator; the
routes stay mounted and return 404 when the experiment is off for the
caller, so a runtime rule for one user applies on the next request
without a restart. There is no `/api/v2` alias.
- **Routes:** list, create (201), get, `PATCH`, delete (204), with
Swagger annotations and audit entries. List returns the automations in
the organization the caller can read (members see their own,
organization admins see all).
- **Service** (`coderd/x/chatd/automations.go`): create validates kind
and target shape, a non-empty prompt, a five-field cron and IANA time
zone, model access, and that an `existing_chat` target is a root chat of
the owner in the same organization. It defaults `when_busy` to `skip`
for schedules and `queue` for webhooks and computes the first schedule
cursor. `PATCH` runs the same per-field validation on each changed
field, rejects `kind` and `target_mode`, bumps `schedule_revision` on
prompt, cron, or time zone changes, and recomputes the cursor on cron or
time zone changes.
- **Owner-only:** only the owner can `PATCH` an automation, even with
organization-admin or site-owner roles (403); admins can list, read, and
delete.
- **Secrets:** a webhook's secret (`coder_automation_` prefix) is
returned once in the create response. Only its SHA-256 is stored, and it
appears in no list, get, audit, or log output.
- **Cap:** new option `--chat-max-automations-per-owner` (default 50)
caps automations per owner across all organizations; creating one more
returns 409. Creates serialize on a per-owner advisory lock.
- **Cron:** `cron.Standard(spec, timeZone)` accepts any standard
five-field expression (the existing `Weekly` rejects day-of-month and
month restrictions). Responses include the next five run times of an
enabled schedule.

PR 3b (stacked on this one) adds disable and re-enable with the queue
cutoff, makes delete run disable first, and adds secret rotation and the
schedule preview route. Until then, the queue promotion guard from
#30096 discards queued rows whose automation was deleted.

Dogfood UAT ran on a real dev instance and passed:
create/list/get/patch/delete via curl, owner-only 403s for an
organization admin and the site owner, the cap (including concurrent
creates and cross-organization counting), a runtime rule turning the
experiment off for one user without a restart, and `/api/v2` 404s.

Part of CODAGT-1209 (PR 3b closes it)
Part of CODAGT-1135
Refs CODAGT-1217

Stack: PR 3 of the Automations for Coder Agents stack, on top of #30096
(which is on top of #30085).

> This PR was written by an AI agent (xum) and reviewed by the agent's
own test audit and UAT. A human has not reviewed it yet.

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_

---------

Signed-off-by: Thomas Kosiewski <tk@coder.com>
2026-10-02 15:54:49 +00:00
Thomas Kosiewski f55aa6c50d feat: add chat automations schema, RBAC resource, and audit entries (#30085)
Adds the storage and authorization pieces for Automations for Coder
Agents. No route, SDK request type, or chatd code uses them yet, so
nothing is exposed.

This is the bottom PR of the Automations stack (RFC step 1). Later PRs
add the chatd acceptance seam, management routes, webhooks, and
schedules on top of these names and constraints.

**Schema** (migrations 000609, 000610)

- `chat_automations` table with enums `chat_automation_kind`,
`chat_automation_target_mode`, `chat_automation_webhook_use`, and
`chat_automation_when_busy`. It includes `created_by_chat_id`, the
webhook secret hash and version, the single-use `webhook_consumed_at`
marker, the schedule cursor and revision, and `queue_generation`. Named
CHECKs enforce the target and kind shapes from the RFC. A composite
foreign key keeps `new_chat_model_config_id` in the automation's
organization, the same pattern the model override tables use. A trigger
(`chat_automations_chat_organization`) keeps `target_chat_id` and
`created_by_chat_id` in that organization too. A composite foreign key
cannot do that while keeping `ON DELETE SET NULL` on PostgreSQL 13. The
trigger validates a reference only on insert or when it changes, so chat
deletion can still clear both references. Indexes cover the owner and
both chat references for cascades and `SET NULL`.
- Provenance columns with partial indexes and no foreign key to
`chat_automations`: `automation_id`, `input_id`, `queue_generation` on
`chat_queued_messages` (all set or all null), `automation_id` and
`input_id` on `chat_messages`, and `chats.automation_id`.
`chats_expanded` is recreated to include `automation_id`.
- `chat_automation` values for `api_key_scope` and `resource_type`. The
down migration is a no-op because enum values cannot be dropped.

**Authorization**

- New organization-scoped RBAC resource `chat_automation` (create, read,
update, delete). The `agents-access` role grants it for the member's own
automations. It is excluded from the member role's user-level
permissions, so a member without `agents-access` gets nothing. Site
owners and organization admins get it through their existing
all-permissions lists. The owner-only update, enable, and run rule from
the RFC belongs to the management service in a later PR.
- The generated scopes stay out of `externalLowLevel`, so API keys gain
no user-requestable scopes.
- `dbauthz` wrappers for the three queries this PR adds:
`InsertChatAutomation`, `GetChatAutomationByID`, and
`DeleteChatAutomationByID`. `InsertChatAutomation` also requires update
on the target chat, read on the creating chat, and read on the new-chat
model config (its user and group ACL). There is also a
`dbgen.ChatAutomation` helper.

**Audit**

- `enterprise/audit/table.go` entries for `ChatAutomation`, with
`webhook_secret_hash` and `prompt` marked `ActionSecret`. The prompt is
treated as chat content, like chat titles. The schedule cursor,
revision, and queue generation are ignored as internal bookkeeping.
`Chat.automation_id` is tracked.

**Required checks from the ticket**

- Migrations apply and roll back: `TestMigrate` and
`TestMigrateUpWithFixtures` (new fixture for 000609). Dogfood UAT also
applied the migrations on a dev instance, rolled them back, re-applied
them, and compared schema dumps. After rollback, the only differences
from main were the enum values that cannot be dropped and develop.sh's
own `_develop` schema. After re-applying, the only difference from this
branch's `dump.sql` was the `_develop` schema.
- Secret hash marked secret: `Test_chatAutomationSecretFieldsRedacted`
checks the table entries and that an audit diff contains neither the raw
hash, its base64 form, nor the prompt text.

Also covered: `TestRolePermissions` cases for own, other owner, other
organization, and a member without `agents-access`.
`TestChatAutomationShapeConstraints` covers the named CHECKs, the
cross-organization foreign key and trigger, a cross-organization
retarget, and deleting referenced chats. Under `site/`, only generated
files changed (`typesGenerated.ts`, `rbacresourcesGenerated.ts`).

Closes CODAGT-1207
Part of CODAGT-1135

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_

---------

Signed-off-by: Thomas Kosiewski <tk@coder.com>
2026-10-02 15:54:48 +00:00
Nick Vigilante 1ad46e48ac feat: report port-forward sessions as app usage (#30156)
`coder port-forward` reported usage with the deprecated
`UpdateWorkspaceUsageContext`.
It now reports a `port_forwarding` session, like `coder ssh` and the VS
Code SSH path, but only while a forwarded TCP connection is open.

**Behavior change:** CLI output is unchanged.
Port-forward sessions previously only bumped the workspace's last-used
time.
With the hidden `workspace-usage` experiment enabled, the server now
also records `port_forwarding` session counts under a new
`port_forwarding` family, which the deployment banner totals under
**Other**.
Without the experiment, `postWorkspaceUsage` returns 204 before reading
the body, so nothing changes.

<details>
<summary>Decisions</summary>

- Added `codersdk.UsageAppNamePortForwarding` (`port_forwarding`) rather
than reusing `ssh`, so port-forwarding isn't counted as interactive SSH.
The name matches the arbitrary app names RFC's connection-method name.
- Registered a `port_forwarding` family in `codersdk/appname.go`.
Families resolve at read time, so no data migration is needed. Template
insights list apps individually; telemetry, metricscache, and agentstats
gauges are legacy fixed fields and stay as they are. The Prometheus
insights family is left to #29906.
- Only TCP connections count. UDP forwards never see EOF, so one
datagram would keep the session active until exit.
- Reports once at startup, like the old call, then every minute and once
on shutdown. An idle tick sends an empty body, which still bumps
last-used.

</details>

Closes [CLI-31](https://linear.app/codercom/issue/CLI-31)

_This PR was generated by Coder Agents on behalf of @nickvigilante._


<details>
<summary>CI note: unrelated test-go-race-pg flake</summary>

The `test-go-race-pg` job failed on a data race between
`tailnet.(*configMaps).updatePeerLocked` and slog formatting of the same
peer value, which does not touch port-forward code. The job was rerun.

</details>
2026-10-02 11:05:48 -04:00
Mathias Fredriksson ff158c0589 feat: preserve user-supplied chat titles (#29486)
Chats created through the API or MCP couldn't be given a title, and
automatic title generation could overwrite a title the user had set,
at creation or by renaming during generation. #30254 tried to keep
renames by comparing title text, but text can't tell a user title
from a generated one that has the same text.

Chat creation over the API and MCP now accepts a title. Each chat
records where its title came from: fallback (derived from the
prompt), generated, or user. A title can only be replaced by a title
from the same source or a higher one, so automatic generation never
overwrites a user's title. Title changes no longer reorder the chat
list, and clients apply them in the order they were written. Chats
created before this change are treated as having fallback titles.

Closes CODAGT-1047
Reverts #30254
2026-10-02 12:58:53 +00:00
Nick Vigilante 4a184ca54a feat: add generated API key scopes reference (DOCS-135) (#29307)
## Summary

Coder validates every requested API key scope against a curated public
catalog in `coderd/rbac`, but the docs never listed it. Readers had to
infer the requestable set from the `codersdk.APIKeyScope` enum, which is
a superset that includes internal scopes a token cannot carry.

This adds `scripts/scopesdocgen`, which renders
`docs/reference/api-key-scopes.md` from `rbac.ExternalScopeNames` and
the policy definitions behind it:

- built-in scopes (`coder:all`, `coder:application_connect`)
- composite `coder:*` scopes, each with the permissions it expands to
- low-level `resource:action` scopes, with the action descriptions the
policy declares
- the deprecated `all` / `application_connect` aliases and their
canonical spellings

The generator is wired into `make gen`, so CI fails when the scope
catalog and the page drift apart.

## Also in this change

- `coderd/apikey.go`: the unrequestable-scope `400` detail pointed at
`admin/users/sessions-tokens#api-key-scopes`, which only ever held a
partial list. It now points at the generated reference.
- `docs/admin/users/sessions-tokens.md`: the partial enumeration and the
"read the schema, but not all of it applies" caveat are replaced with a
link to the reference. The how-to content stays.

## Verification

- `go test ./scripts/scopesdocgen` covers the sentence formatting, the
scope partitioning, and a guard that every name in
`rbac.ExternalScopeNames()` appears on the rendered page.
- `go test ./coderd -run
'TestTokenScoped|TestCreateTokenScopes|TestExternalScopesAreStorable|TestTokenLegacySingularScopeCompat'`
passes, confirming the page's claims about the default scope and the
rejection of internal scopes.
- `make lint/emdash`, `make lint/docs-html`, `make lint/check-scopes`,
`pnpm run check-docs`, and Vale on the changed pages are clean. Full
`make pre-commit` passed.

<details>
<summary>Context and scope decisions</summary>

Part of the DOCS Automated reference documentation project, which tracks
generating reference pages from product source of truth instead of
maintaining them by hand. DOCS-135 is the first item: it was filed as
"wire up the existing generator," but `scripts/apikeyscopesgen` emits Go
(`codersdk/apikey_scopes_gen.go`), not documentation, so there was no
generator output to surface and this adds one.

Decisions made while implementing:

- **Placement.** `docs/reference/api-key-scopes.md`, as a direct child
of Reference rather than inside `docs/reference/api/`, because that
directory is owned by the swagger generator.
- **Page shape.** Follows the `scripts/docgenenv` convention for
generated reference pages: the generated marker and page metadata in
front matter, the generated-content banner in the body, and sections
starting at level two because the front-matter title renders as the page
heading.
- **Public scopes only.** The page lists what `rbac.IsExternalScope`
accepts. Internal `resource:action` pairs are deliberately excluded,
which is the distinction the old schema link failed to make.
- **Acronym handling.** Policy action descriptions are lowercase source
strings (`"ssh into a given workspace"`). The generator restores the
casing of a small set of leading acronyms rather than editing the RBAC
package, so the change stays inside the docs pipeline.

Sibling backlog items turned out to be already delivered and are being
rescoped separately: `metricsdocgen` and `auditdocgen` already write
into their docs pages, and `scripts/configdocgen` already generates the
configuration reference.

</details>

---

Generated with Coder Agents on behalf of @nickvigilante. Linear:
[DOCS-135](https://linear.app/codercom/issue/DOCS-135/wave-1-wire-up-api-key-scopes-reference-to-docs)


## Product UI impact, please read

This PR corrects three RBAC action description strings in
`coderd/rbac/policy/policy.go`:

| Action | Before | After |
|---|---|---|
| `workspace:start` | allows starting a workspace | start a workspace |
| `workspace:stop` | allows stopping a workspace | stop a workspace |
| `api_key:update` | update an api key, eg expires | update an api key,
for example its expiry |

These were internal-facing until this PR, which is what made them worth
fixing: the new reference page renders them verbatim to operators, and
"eg expires" is not decodable by a reader without codebase context.

**They are not docs-only.** `make gen` propagates them to
`coderd/rbac/object_gen.go` and
`site/src/api/rbacresourcesGenerated.ts`, and
`CreateEditRolePageView.tsx` renders the description next to each action
in the custom roles editor. So this changes admin UI copy, and
`CreateEditRolePageView.stories.tsx` means Pixel may now report a
genuine snapshot diff on that component rather than the pre-existing
failure noted below.

The new wording matches the convention the rest of the table already
follows (`ssh into a given workspace`, `create an AI Gateway key`), so
this makes the UI more internally consistent, not less. Flagging it
explicitly because a docs PR changing product copy deserves an owner's
eyes rather than a silent merge. Happy to split it out if RBAC or
frontend would rather own it, with the caveat that the reference page
would then publish `eg expires` in the meantime.

<details>
<summary>CI note: Storybook / Pixel failure</summary>

The `Storybook` check fails at its `Snapshot` step, and `Pixel / Review`
reports `build failed` with no snapshots processed.

**Updated:** this note originally said the branch touched no files under
`site/`. That is no longer true. Correcting the RBAC policy description
strings (CRF-24) required `make gen`, which regenerated
`site/src/api/rbacresourcesGenerated.ts` alongside
`coderd/rbac/object_gen.go`. That file is a generated string table with
no rendered component behind it, so it still cannot account for a
Storybook snapshot or Pixel build failure, but the original
justification no longer holds and is replaced by this one. The failure
predates that change: it was present when the branch genuinely had no
`site/` diff. Every other check passes.

</details>
2026-10-01 16:09:01 -04:00
Garrett DelfosseandClaude Opus 5.5 7cd1b2040b feat: add chat projects API (#29242)
- Experiment, behind `chat-projects` (off by default). First of three
stacked PRs: #29301 (memory), #29583 (UI). This PR is API only; the
screenshots below are from the UI in #29583.
- CRUD under
`/api/experimental/organizations/{organization}/chats/projects/{project}`.
`GET /api/experimental/chats/projects` lists the caller's projects
across all organizations.
- `project_id` on chat create and as a chat list filter. A chat joins a
project only at creation; there is no move.
- Projects are identified by ID. Names are display labels (64
characters, description 1024) with no uniqueness constraint. An optional
`icon` URL (usually an emoji image under `/emojis`) is capped at 256
characters and audited.
- A user can own at most 100 projects across all organizations; creating
another answers 409. Creates count and insert under a per-owner advisory
lock so concurrent requests cannot overshoot.
- Projects are private to their `owner_id`. Members may only create
their own, and a chat can only be bound to a project its owner owns. An
unreadable or foreign project on chat create answers 404 so IDs cannot
be probed; a project from another organization answers 400.
- Permissions ride on the `agents-access` role next to chats (after
#30004), so whoever can use Coder Agents can use projects. Owners and
org admins reach every project.

### Examples

Create a project in an organization:

```http
POST /api/experimental/organizations/{organization}/chats/projects
{"name": "Platform", "description": "Infra and deploy work", "icon": "/emojis/1f680.png"}
```

```json
{
  "id": "7c0e4a3e-5b1f-4f7d-9a51-2f3c8f6d2b10",
  "organization_id": "bb640d07-ca8a-4869-b6bc-ae61ebb2fda1",
  "owner_id": "0ed9befc-4911-4ccf-a8e2-559bf72daa94",
  "name": "Platform",
  "description": "Infra and deploy work",
  "icon": "/emojis/1f680.png",
  "created_at": "2026-09-30T15:04:05Z",
  "updated_at": "2026-09-30T15:04:05Z"
}
```

List the caller's projects across organizations with `GET
/api/experimental/chats/projects` (an array of the object above). Update
with `PATCH .../chats/projects/{project}` and any of `name`,
`description`, `icon`; delete with `DELETE`, which detaches its chats.

Create a chat in the project, and list only its chats:

```http
POST /api/v2/chats
{"organization_id": "bb640d07-…", "project_id": "7c0e4a3e-…", "content": [{"type": "text", "text": "Plan the deploy"}]}

GET /api/v2/chats?project_id=7c0e4a3e-…
```

At the limit:

```json
409 {"message": "You can have at most 100 chat projects. Delete a project to create another."}
```

<details>
<summary>Screenshots (UI from #29583)</summary>

![Create
project](https://raw.githubusercontent.com/coder/coder/f0ssel/chat-projects-assets/v3/pr1-01-create-project-dialog.png)
![Sidebar
folders](https://raw.githubusercontent.com/coder/coder/f0ssel/chat-projects-assets/v3/pr1-02-sidebar-folders.png)
![Project
page](https://raw.githubusercontent.com/coder/coder/f0ssel/chat-projects-assets/v3/pr1-03-project-page.png)
![Folder
menu](https://raw.githubusercontent.com/coder/coder/f0ssel/chat-projects-assets/v3/pr1-05-folder-menu.png)
![Another member sees no
projects](https://raw.githubusercontent.com/coder/coder/f0ssel/chat-projects-assets/v3/pr5-member-sees-no-projects.png)

</details>

---
Generated with Coder Agents on behalf of @f0ssel.

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-01 11:49:21 -04:00
Nick Vigilante 0d1225694e feat: show coder sharing in CLI help and reference docs (#30141)
`coder sharing` has been hidden since it was added behind an experiment,
although Shared Workspaces is GA and the prose docs already use it.

This removes `Hidden: true`, regenerates `docs/reference/cli/sharing/*`,
and adds the pages to the docs manifest.
The shared workspaces guide and the persistent shared workspaces
tutorial now link to the new reference.

**Behavior change:** `coder sharing` and its subcommands now appear in
`coder --help`.
The commands themselves are unchanged.
The `sharing remove --user/--group` help text previously said "to share
the workspace with"; it now says "to remove from the workspace".

<details>
<summary>Decisions</summary>

- Follow-up not in this PR: `DELETE /workspaces/{workspace}/acl` has no
CLI caller.

</details>

Closes [CLI-22](https://linear.app/codercom/issue/CLI-22)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 21:29:51 +00:00
Nick Vigilante 46265fc361 fix: hide the unused --yes flag on coder organizations create (#30144)
`coder organizations create` registered `-y/--yes` but has had no
confirmation prompt since the org-delete prompt was removed in #16972.

`-y` is now a hidden no-op: it's gone from help and the reference docs
but still accepted, so existing scripts don't break.

**Behavior change:** `-y/--yes` no longer appears in `coder
organizations create --help`.
Passing it still works.

<details>
<summary>Decisions</summary>

- Adds `cliui.HiddenSkipPromptOption()`. The autoupdate PR adds the same
helper, so whichever merges second will need a trivial rebase.

</details>

Closes [CLI-26](https://linear.app/codercom/issue/CLI-26)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 14:57:29 -04:00
Nick Vigilante 1fd383e4fd docs: flatten lone index pages to single files (#30129)
The beta docs engine turns a directory that holds only an `index.md`
into an empty collapsible section in the sidebar. Two pages on `main`
have that shape: `docs/admin/external-auth/index.md` and
`docs/ai-coder/agents/tools/index.md`. docs-engine is handling the shape
in its own code (the sidebar render fix in
https://github.com/coder/docs-engine/pull/196 and the sync-side handling
in https://github.com/coder/docs-engine/pull/195), and this change
removes it at the source by moving each page to a flat file:
`docs/admin/external-auth.md` and `docs/ai-coder/agents/tools.md`. Both
directories held only `index.md`, with no images or other files.

The change updates the two `docs/manifest.json` paths, 29 inbound
relative links across 17 pages, and the relative links inside the moved
pages (three images and two page links in `external-auth.md`, one page
link in `tools.md`), which now resolve one directory up. The ESR upgrade
table in `docs/install/operate/upgrade/esr-2.29-2.34-upgrade.md` is
re-padded because its link cells shrank, which is why that file shows 28
changed lines. No generator under `scripts/`, the docs-preview workflow,
or `docs/.style` references either path.

Published URLs stay the same, so no redirect is needed. coder.com's
`convertPathToRoute` strips the `index.md` or `.md` suffix, the
docs-preview workflow's `map_doc_path` maps `<dir>/index.md` and
`<dir>.md` to the same route, and docs-engine's `mapMdPath` returns
`admin/external-auth` and `ai-coder/agents/tools` for both the old and
new paths.

For verification, `docs/manifest.json` parses and all 471 of its paths
exist. `make pre-commit-light` passes, which covers markdownlint, the
table formatter, typos, emdash, and shellcheck, and `go run
./scripts/docshtmlcheck` passes. A local script resolved all 306
relative links in the changed files, and every one that the move touched
points at an existing file and heading. linkspector runs on this PR in
CI. A backport PR for `release/2.37` moves the same two pages plus
`admin/licensing` and `install/other`:
https://github.com/coder/coder/pull/30130.

This change was prepared with AI assistance. The AI agent that prepared
it ran the checks described above.

---

🤖 Built with AI assistance.
2026-09-30 14:34:33 -04:00
Nick Vigilante b6aab35a7b feat!: confirm before coder update restarts a running workspace (#30150)
`coder update` stopped and restarted a running workspace without asking
and had no `-y`, while `coder restart` and the dashboard's update dialog
both confirm first.

It now asks for confirmation before stopping a running workspace, using
the dashboard's wording that updating can delete non-persistent data.
`-y` skips it, and also answers the existing "Enqueue another stop?"
prompt.

**Behavior change:** **New prompt; can break scripts.** `coder update`
on a running workspace without `-y` now blocks on stdin, or fails if
stdin is closed.
Stopped workspaces don't prompt.
Parameter prompts such as `--always-prompt` aren't affected by `-y`.

The [Update
workspaces](https://coder.com/docs/user-guides/workspace-management#update-with-the-cli)
guide now notes the prompt and `-y`.

<details>
<summary>Decisions</summary>

- Mirrors `coder restart`'s prompt pattern.
- Doc-check suggested a row in the 2.29 to 2.34 ESR upgrade guide. This
change ships after 2.34, so it's documented in the user guide instead.

</details>

Closes [CLI-34](https://linear.app/codercom/issue/CLI-34)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 14:31:43 -04:00
Nick Vigilante c9813d97f7 fix: swap description and command in coder organizations show examples (#30154)
The `coder organizations show` help examples had their `Description` and
`Command` fields swapped, so `--help` and
`docs/reference/cli/organizations/show.md` read backwards.

This swaps them back, tidies the descriptions, and regenerates the help
snapshot and reference page.

**Behavior change:** Help text and generated docs only.

Closes [CLI-38](https://linear.app/codercom/issue/CLI-38)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 13:00:38 -04:00
J. Scott Miller 7a9442014e feat: add chatd lifecycle stage tracer (#29769)
**TL;DR:** Adds a stage tracer that turns each chat lifecycle stage into
both an OpenTelemetry span and a Prometheus histogram observation, so
traces and metrics always agree. The metrics are only registered with
the `chat-stage-metrics` experiment. Nothing calls the tracer until the
next PRs.

Adds `chatloop.StageTracer`, which emits each chat lifecycle stage as an
OpenTelemetry span and a `coderd_chatd_stage_duration_seconds{stage,
scope, chat_kind}` observation from one `End` call, so trace and metric
durations cannot disagree. The provider-bound stages (`stream`,
`provider_attempt`) are also observed on
`coderd_chatd_model_stage_duration_seconds{stage, provider_type,
chat_kind, model}`, the only family carrying `provider_type` and
`model`, and only for turn-scoped stages. Time to first token per model
stays on the existing `coderd_chatd_ttft_seconds`. Nothing calls the
tracer yet; the next PRs instrument the provider call and the runner.

- The families are registered only when the `chat-stage-metrics`
experiment is enabled (safe and known, so
`--experiments=chat-stage-metrics` or `--experiments=*` turns it on).
Spans are emitted regardless. `NewMetrics` leaves the families off;
`chatd.New` opts in from the experiment, and a test asserts the
experiment decides whether they reach the server's registry.
- `Stage`, `Scope`, `ChatKind`, and `StageAnomaly` are typed string
constants. `scope` separates latency attributable to a prompt (`turn`)
from detached `background` work; `chat_kind` is `root` or `subagent`,
empty without a known chat.
- `StageModel` carries the wire `provider`, `provider_type`, `model`,
and `reasoning_effort`. All are span attributes; only `provider_type`
and `model` are metric labels, on the model family. No family carries an
organization label.
- Observed stages: `chat_turn`, `queue_wait`, `acquisition`,
`mcp_connect`, `stream`, `time_to_first_token`, `provider_attempt`,
`tool_call`, `commit`, `retry_backoff`. `generation_step`, `prepare`,
`thinking`, and `compaction` are span-only. A test keeps the stage sets
and help text consistent.
- API: `Start` / `StartRootAt` for live spans (span timestamps come from
the tracer clock), `Record` for stages reconstructed from timestamps
(the scope comes from the context). `End` is idempotent;
`EndWithoutObservation` ends the span without a sample. A nil tracer,
provider, or metrics discards.
- `coderd_chatd_stage_anomalies_total{reason}` counts observations
dropped, adjusted, or inconsistent (`negative_elapsed`,
`inverted_window`, `missing_timestamp`, `future_start`, `stale_anchor`).
Span-only stages never feed it.
- Buckets are 12 round edges (`0.1 0.25 0.5 1 2.5 5 10 30 60 300 1800
3600`).
- Moves the body of the `for` loop in `StartGeneration` into
`runGenerationStep` so the step has a function boundary for a deferred
stage end. Control flow and error wrapping are unchanged.

<details>
<summary>Series cost (approximate, whole stack)</summary>

A histogram label set is 12 edges + `+Inf` + `_sum` + `_count`: 15
series. Per replica, each `chat_kind` costs about 150 stage series and 4
turn outcome counters; each `(chat_kind, model)` costs 30 (2 stages x
15). Both chat kinds on `M` models: about `308 + 60*M` per replica, plus
background-scope stage series.

Dogfood `main`, 3 replicas: ~3.4k `coderd_*` series per replica (~10.1k
total).

| Models used per replica | Added series (3 replicas) | vs. baseline |
|---:|---:|---:|
| 1 | ~1.1k | +11% |
| 5 | ~1.8k | +18% |
| 10 | ~2.7k | +27% |
| 35 | ~7.2k | +72% |

Most deployments run four or fewer models, so a typical replica adds
roughly 370 to 550 series. The experimental turn accounting in #29772
would add 88 more per replica (11 categories x 4 outcomes x 2 chat
kinds). Series appear lazily and do not grow with organizations.

</details>

<details>
<summary>Review decisions</summary>

- Experiment gate only; no deployment flag or metric levels. If the
experiment graduates, the families become always on like the other chatd
families; a flag is added then only if dogfood shows a cardinality
problem.
- Organization is on neither metrics nor spans, and `effort` is
span-only; `provider_type` (configured type), not the wire `provider`,
is the model-family label.
- `time_to_first_token` is not on the model family; per-model TTFT is
`ttft_seconds`, which observes the same measured window.
- The model family records only turn-scoped stages.
- Nil guards are kept so a nil or zero tracer is always safe to call.
- HTTP attribute keys stay snake_case like the rest of the chatd span
attributes.

</details>

Supersedes #28968 and #28969.

🤖 This PR was generated by Coder Agents on behalf of @jscottmiller.
2026-09-30 11:53:57 -05:00
Nick Vigilante 3baeaceb1d feat: show coder workspace-proxy in CLI help and reference docs (#30146)
`coder workspace-proxy` (`wsproxy`) has been hidden since it was added
for manual testing in #7176, although
`docs/admin/networking/workspace-proxies.md` tells admins to run it.

This removes `Hidden: true`, regenerates
`docs/reference/cli/workspace-proxy/*`, adds them to the docs manifest,
and corrects "Display of the proxy" to "Display name of the proxy" in
the `create` and `edit` help.

**Behavior change:** `coder workspace-proxy` and its subcommands now
appear in `coder --help`.
The commands themselves are unchanged.

<details>
<summary>Decisions</summary>

- `server` stays visible. Its reference page is 447 lines, about a fifth
of `coder server`, because it only lists proxy-relevant options.
- Rough edge not fixed here: `create` and `regenerate-token` print the
proxy token in cleartext, including in the default table columns. That's
consistent with other show-once secrets but worth a docs callout.
- Most of this diff is generated reference pages.

</details>

Closes [CLI-28](https://linear.app/codercom/issue/CLI-28)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 12:39:06 -04:00
Nick Vigilante e6774c2602 feat: add --column to coder users show (#30143)
`coder users show` offered `-o table|json` but was the only table
command without `-c/--column`, because it uses a custom key/value
format.

The custom format now registers `-c` and filters its rows.
Column names match `users list` where they overlap: `id`, `username`,
`name`, `email`, `status`, `created at`, `roles`, `organizations`.

**Behavior change:** Additive.
The default output is byte-for-byte unchanged.

<details>
<summary>Decisions</summary>

- Switching to `cliui.TableFormat` would have turned the vertical
key/value layout into a horizontal table, so the existing renderer is
kept and filtered instead.

</details>

Closes [CLI-25](https://linear.app/codercom/issue/CLI-25)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 12:38:45 -04:00
Nick Vigilante dde500a646 feat: add --yes to coder users suspend and activate (#30155)
`coder users suspend` and `coder users activate` always prompt but,
unlike other commands with a confirmation prompt, had no `-y/--yes`.

Both now accept `-y`.
The suspend help also says that suspending stops the user's running
workspaces and that activating doesn't restart them.

**Behavior change:** Additive.
New `-y` flag; without it, both commands prompt as before.

<details>
<summary>Decisions</summary>

- The workspace note is based on the lifecycle executor, which
auto-stops a suspended user's running workspaces; activation doesn't
restart them.

</details>

Closes [CLI-23](https://linear.app/codercom/issue/CLI-23)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 12:38:14 -04:00
Nick Vigilante cf60604a75 feat!: confirm role changes in coder users edit-roles (#30140)
`coder users edit-roles --roles ...` replaces the user's whole set of
site roles, so granting one role could silently remove others, including
owner.
It registered `-y` but never prompted, and `-y` didn't skip the
interactive role picker.

It now prints the roles being added and removed and asks for
confirmation; `-y` skips it.
The `--roles` help says it replaces the full set.

**Behavior change:** **New prompt; can break scripts.** `edit-roles
--roles ...` without `-y` now prompts.
`-y` without `--roles` now fails with an error instead of opening the
picker.
If the requested roles match the current roles, it prints `No role
changes for <user>.` and doesn't prompt.

<details>
<summary>Decisions</summary>

- No-op requests skip the prompt so idempotent scripted calls stay
quiet.

</details>

Closes [CLI-21](https://linear.app/codercom/issue/CLI-21)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 12:36:30 -04:00
Nick Vigilante 302edffd87 feat: add JSON output to coder server create-admin-user (#30138)
`coder server create-admin-user` is mostly used in automation but only
printed text.

It now accepts `-o text|json`.
JSON contains the created user's ID, username, email, roles, and
organization memberships.

**Behavior change:** Additive.
The default text output is unchanged and still goes to stderr.
JSON goes to stdout so it can be piped.
The password is never included in any format.

<details>
<summary>Decisions</summary>

- The command talks to the database directly, so the JSON uses a small
local response type instead of a codersdk type.
- JSON goes to stdout while text stays on stderr, matching how other
commands emit machine-readable output.

</details>

Closes [CLI-17](https://linear.app/codercom/issue/CLI-17)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 12:36:05 -04:00
Nick Vigilante fd41ca682a feat: add JSON output to coder licenses add and delete (#30137)
`coder licenses add` and `coder licenses delete` printed only text,
while `coder licenses list` supports `-o json`.

Both now accept `-o text|json`.
`add` prints the added license in the same shape as `licenses list -o
json`, and `delete` prints `{"id": <id>}`.

**Behavior change:** Additive.
Default text output is unchanged.
The license key itself is never printed.

<details>
<summary>Decisions</summary>

- `add` applies the same `license_expires_human` claim enrichment that
`licenses list` does, so the two JSON shapes match.

</details>

Closes [CLI-16](https://linear.app/codercom/issue/CLI-16)

_This PR was generated by Coder Agents on behalf of @nickvigilante._
2026-09-30 12:35:41 -04:00
Nick Vigilante 4a62b0fc9c docs: add YAML front matter to remaining pages (#30115)
## Summary

Add YAML front matter to the remaining published documentation pages so
all published pages expose a title through front matter.

## Changes

- Add front matter to the 13 published pages that were missing it.
- Preserve the page titles and feature states in the manifest.
- Remove duplicate H1 headings where the front matter supplies the page
title.

## Testing

- `pnpm check-docs` passed.
- Repository pre-commit checks passed.
- Verified all 439 published manifest route entries have YAML front
matter.

Depends on #30109.

Refs DOCS-1124.

This pull request was generated by Coder Agents.
2026-09-29 20:31:27 -04:00
Andrew Aquino 4a67ac3306 feat: buffer CLI session logs and flush on connection failure (#29752)
## What

Adds in-memory log buffering for CLI diagnostics so the debug detail
leading up to a failure is available without logging debug during normal
operation. Below-level entries are kept in a slog flight recorder
(`v3.2.0`) and emitted only when a command returns an error. This
implements CLI-4 (connection-log RFC req 13). Depends on the
`cdr.dev/slog/v3` `v3.2.0` bump (already on `main`).

## How

- **Root command** (`cli/root.go`):
- New global `--log-buffer-size` / `CODER_LOG_BUFFER_SIZE` (default
`10`, `0` disables, clamped to `10000`), shared by all commands instead
of duplicated per command.
- `bufferedLoggerMiddleware` runs the invocation logger at `Info` (or
`Debug` with `-v`) with a flight recorder, and on a returned error calls
`Flush` to replay the buffered history to stderr. `Flush` does not add a
duplicate error line; the returned error is still rendered by the normal
formatter.
- Opt-in via an `annotationBufferedLogger` annotation so it does not
clobber the ~17 commands that build their own logger on `inv.Logger`
(which would otherwise double-log). Future commands opt in with one
line.
- `start` / `stop` / `update`: opt into the middleware and just
`client.SetLogger(inv.Logger)` so codersdk request/response debug is
captured and flushed to stderr on failure. They **no longer write
session log files** and dropped their per-command `--log-dir` /
`--log-buffer-size`.
- `ssh`: keeps its own file logger (writing to stderr would corrupt its
stdio stream), now using the global buffer size and the shared
`bufferedLogger` helper. It retains `--log-dir` / `CODER_SSH_LOG_DIR`,
stdio/PID filename handling, and file pruning (50 most recent).
- `restart` is excluded, matching the `client_session_id` opt-in set
(DEVEX-664).

## Default behavior change

`start` / `stop` / `update` now emit buffered diagnostics (recent
below-level entries, e.g. sdk request/response) to **stderr** when they
fail; on success they stay quiet. `coder ssh` continues to write a
per-connection diagnostic file by default under the XDG state dir
(`~/.local/state/coder/logs`), pruned to the 50 most recent. Opt out of
buffering with `--log-buffer-size 0`.

## Review changes (Asher)

- Shared logger construction: the level is computed once and the flight
recorder is always attached, in a single `bufferedLogger` helper used by
ssh and the workspace commands.
- Workspace commands print to normal output instead of a log file, and
the default buffer is `10` to avoid flooding the terminal on failure.
- The buffer lives on the root command / logger (global option +
middleware) rather than being wired into each command.

## Alignment with #29671 (agent)

Same core model: `Info` default with a flight recorder, `-v` for full
debug, and the shared `--log-buffer-size` semantics (`0` disables).
Differences: the agent writes to a file and defaults the buffer to
`1000`, while the CLI prints to stderr and defaults to `10`; both now
rely on slog's auto-flush-on-error (the CLI additionally flushes via the
middleware on a returned error).

> [!NOTE]
> The agent PR (#29671) adds an agent-scoped `--log-buffer-size` /
`CODER_AGENT_LOG_BUFFER_SIZE` on the hidden `coder agent` command. Once
both land, the global `--log-buffer-size` here and the agent's own flag
will need reconciling on `coder agent`. Flagging for whichever merges
second.

## Testing

`cli.TestClampLogBufferSize`, `TestPruneSessionLogs`,
`TestDefaultSessionLogDir`, and `TestBufferedLogger_*` cover clamping,
ssh log retention, the default state dir, buffer-until-error, the
middleware's flush path, and the verbose escape hatch.
`start`/`stop`/`update`/`ssh` command tests pass. Golden `--help` output
and `docs/reference/cli` regenerated. (`TestSSH/Env` is a pre-existing
interactive-PTY test that does not run in all sandboxes; it fails
identically on `main` here.)

<details>
<summary>Rollout context</summary>

Cross-repo sequence: coder/slog flight recorder (released as v3.2.0) ->
go.mod bump in coder/coder (#29600, merged) -> CLIENT-672 (agent,
#29671) and this PR (CLI-4), which are independent consumers and can
merge in any order.
</details>

---
<sub>Opened by Coder Agents on behalf of @aqandrew.</sub>
2026-09-29 22:27:30 +00:00
Cian Johnston 9fa17a12ef fix: strip client actor headers unconditionally (#30037)
Strip all client-supplied headers matching `IsActorHeader()` in
`PrepareClientHeaders`, regardless of `send_actor_headers`. This
reserves the case-insensitive `X-AI-Bridge-Actor` prefix for identity
injected by the gateway. Remove the redundant deletion of the three
standard actor headers from `BuildUpstreamHeaders`.

Generated with Coder Agents on behalf of @johnstcn.
2026-09-29 20:26:17 +01:00
Cian Johnston 8742d2484c feat: add opt-in AI Gateway actor email headers (#29930)
Add opt-in forwarding of the authenticated Coder account email through
`--ai-gateway-actor-header-meta-email`,
`CODER_AI_GATEWAY_ACTOR_HEADER_META_EMAIL`, or
`ai_gateway.actor_header_meta_email`. The option defaults to empty:
enabling `send_actor_headers` alone does not forward email. Set a
destination header explicitly to opt in; accounts without an email omit
it.

Carry authenticated email through the Gateway authorization response and
strip client-supplied standard/configured email headers before applying
trusted identity. The additive protocol field joins unreleased Gateway
API v1.3 alongside workspace attribution. Includes email configuration
precedence, authorization compatibility, captured upstream request
tests, and matching documentation.

Refs https://linear.app/codercom/issue/AIGOV-601

Generated with Coder Agents on behalf of @johnstcn.
2026-09-29 20:07:49 +01:00
Cian Johnston 05d1fa8a4c feat: configure AI Gateway actor identity headers (#29929)
Allows configuring AI Gateway actor ID and username headers independently through
`--ai-gateway-actor-header-id` and
`--ai-gateway-actor-header-username` or associated environment
variables and YAML settings. 

- Defaults to existing header name, an empty string disables that attribute. 
- Existing `send_actor_headers` gate remains off by default.
- Validates header names, case-insensitive collisions, and protected
destinations for embedded and standalone gateways.
- Strips standard and configured identity destinations before injecting authenticated values.
- Adds coverage for configuration precedence, captured upstream request, and generated help/API documentation.

Refs https://linear.app/codercom/issue/AIGOV-601

Generated with Coder Agents on behalf of @johnstcn.
2026-09-29 18:22:59 +01:00
Sas Swart bcb981b839 chore: bump github.com/coder/boundary to v0.11.0 (#30083)
Bumps `github.com/coder/boundary` from v0.10.0 to
[v0.11.0](https://github.com/coder/boundary/releases/tag/v0.11.0). No
transitive dependency changes.

boundary v0.11.0 wraps the `--session-id-inject-target` format and
example in backticks, so:

- The `coder agent-firewall` help golden and
`docs/reference/cli/agent-firewall.md` are regenerated.
- The temporary `<host>`/`<glob>` entry for that page in
`scripts/docshtmlcheck`'s `allowedUnknownTags` is now stale (the
linter's self-clearing guard fails on it), so it is removed. The
allowlist is now passed into `filterAllowed`/`reportFindings` so the
tests use their own fixture instead of depending on the real, now-empty
map.

> Generated by Coder Agents on behalf of @SasSwart.
2026-09-29 17:00:27 +02:00
Mathias Fredriksson dd1c836ab0 feat: gate the chat board behind a hidden experiment (#30084)
Follow-up to #29425 and #29472. Before this PR, any deployment could
turn on the chat board, because it only needed a per-browser opt-in.
Now it also needs to enable the experiment.
2026-09-29 17:44:03 +03:00
Thomas Kosiewski 12be685b59 feat: add experimental API and CLI to manage experiment rules (#29971)
Slice 4 of 4 for runtime experiment rules: an experimental management
API and a hidden CLI, so admins can target, widen, or kill a user-scoped
experiment at runtime without a redeploy. This PR also adds a
startup-default note on the Deployment Overview page and a docs section.

## What's in it

- **API** under `/api/experimental/experiments/rules` (behind
`apiKeyMiddleware` and `httpmw.NoStore`):
- `GET` returns, per user-scoped experiment, the startup default and the
stored rule (mode, condition, revision, actor, time). Stored rules for
other experiments follow, marked `ignored`.
  - `PUT /{experiment}` takes `{mode, condition?, expected_revision}`.
- **Write path:**
- It authorizes read and update on `DeploymentConfig` before parsing
anything. A denied request gets 403 and is not audited.
- It validates next. An invalid condition returns 400 with the full CEL
diagnostics, is not audited, and leaves the rule unchanged.
- It then starts the audit and calls `experiments.WriteRule`. A stale
revision returns 409 and a transaction error returns 500; both are
audited with an empty diff.
- An identical write returns 200, creates no audit entry, and keeps the
revision.
- The audit export happens after commit. If it fails, that is logged and
the committed change stands (the existing audit contract).
- **SDK:** `ExperimentalClient.ExperimentRules` and
`ExperimentalClient.PutExperimentRule`.
- **CLI:** hidden `coder exp experiment-rules list|on|off|set|reset`.
- Write commands take `--expected-revision`. Without it they read the
current revision first, which only protects the gap between the two
calls; the help text says so.
  - A 409 prints the current rule and exits non-zero, with no retry.
- `reset` warns when the startup default is on, because reset is not a
kill switch.
- **Deployment Overview:** a note says the Experiments values are
startup defaults that runtime rules can override per user.
- **Docs:** a new "Target experiments at runtime" section in
`docs/reference/feature-stages.md` covers the modes, roles, CEL fields
and limits, reset vs. off, revisions and audit, the kill-switch
guarantee (including the rolling-upgrade requirement), frontend
freshness, fail-closed behavior, and that rules are not an authorization
boundary.

## Testing

- **HTTP:** every mode applies on the next request with no restart;
rejected writes keep the rule; RBAC (members 403 on GET and PUT;
auditors can read but not write; an invalid body from an unauthorized
caller still gets 403); malformed and ignored stored rows.
- **HA:** two coderd instances share one database. A PUT through A is
seen by B's `/api/v2/experiments` and by B's evaluator, which is the one
chatd uses.
- **Audit (enterprise, licensed):** an effective change creates one
entry whose diff carries the condition, and the entry is found before
the diff is checked. No-ops, 403s and 400s create no entry. A 409 and an
injected 500 are audited with an empty diff. A failed export keeps the
change.
- **Redaction:** a sentinel condition appears only in the rules API,
audit entries, and the server log's audit lines (Enterprise's slog audit
backend writes every audit diff there). It is absent from every other
log line, `/deployment/config`, the support bundle, and telemetry. The
test wires the slog audit backend so this is checked as stated.
- **CLI:** write and list, a conflict that is not retried, and the reset
warning.

Remote dogfood UAT through Coder Agents passed on a licensed test
deployment:
- the CLI;
- per-user results in the browser;
- 403 for members, including an invalid body;
- group targeting, including removing the user from the group;
- sentinel redaction across logs, `/deployment/config`, the support
bundle and the audit API (at that head the audit still masked the
condition; it is now tracked);
- the audit page showing the condition as changed but masked (same
note);
- the Overview note;
- the static default with `off` and `reset`;
- chatd enforcement toggled between turns.

That round tested `135aaaa41e`. The later commits are a CLI refactor and
a test addition, and a follow-up round will cover the final head.

## Follow-ups (low, not in this PR)

- A broken rule logs one error line per evaluation. Consider
rate-limiting it per experiment and revision.
- There's no API or CLI path to clear a stored rule for an experiment
that isn't user-scoped; those rules are inert and listed as `ignored`.
- A malformed stored rule is listed with zero `updated_by` and
`updated_at` values instead of omitting them.
- CLI wording: the 409 message, conflict output showing a UUID instead
of a username, a no-op write not saying nothing changed, and the parent
help lacking the `user.*` fields.
- `PutExperimentRuleRequest.mode` is not in the Swagger `required` list.
An omitted mode already returns 400.
- The dashboard's experiments query (from #29964) refreshes on mount,
window focus or reconnect once 60 seconds old, not on a timer, and its
comment says it bounds staleness. Correct the comment, or add a refetch
interval if the UI must pick up rule changes without a reload.

## Stack

1. #29869: evaluator library
2. #29898: storage and audit types
3. #29964: enforcement and discovery
4. **This PR:** control plane

> [!NOTE]
> This PR was written by an AI agent (Xum).

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_

---------

Signed-off-by: Thomas Kosiewski <tk@coder.com>
2026-09-29 12:23:00 +00:00
Thomas Kosiewski a0b00b5e4b feat: store experiment rules with revisions and audit types (#29898)
Slice 2 of 4 for runtime experiment rules: persist one rule per
experiment in `site_configs`, with revisions that only increase, and add
an audit record type. Nothing calls this code yet, so behavior does not
change.

## What's in it

- **Queries** in `siteconfig.sql`, all checked by dbauthz against
`ResourceDeploymentConfig`:
- `GetExperimentRules` (read) lists `experiment_rule:` keys with
`starts_with`, not `LIKE`, because `_` is a `LIKE` wildcard.
  - `GetExperimentRule` (read) reads one row.
  - `UpsertExperimentRule` (update) writes one row.
- **`experiments.WriteRule(ctx, db, actor, ex, rule,
expectedRevision)`** validates the rule first, then does everything in
one `READ COMMITTED` transaction:
  - It takes an advisory lock for that experiment, waiting at most 5 s.
  - It reads the current row; a missing row counts as revision 0.
- It returns `*RevisionConflictError` when the expected revision is
stale.
- An identical mode and condition writes nothing and returns
`changed=false`. The first `inherit` on a missing row is a change and
stores revision 1.
- Otherwise it writes `revision+1` with the actor and time, and returns
the old and new rule as read and written inside the transaction.
- **`experiments.NewDBStore(db)`** implements the evaluator's `Store`.
It reads rules by prefix, plus the user's id, username, email, explicit
site roles, member org names, and `<org>/<group>` group names (including
`<org>/Everyone`). It runs as the system.
- **Audit:**
- A new `resource_type` enum value `experiment_rule` (migration
`000602`; the down migration is a comment because PostgreSQL cannot drop
enum values).
- A new struct `database.ExperimentRule`. `experiments.AuditRecord`
derives its ID from the experiment name, so audit history groups by
experiment.
- In the audit table, `experiment`, `mode` `revision` and `condition`
are tracked (`ActionTrack`), so the audit diff shows the old and new
condition. In Enterprise, the slog audit backend also writes that diff
to the server log. Admins and auditors can already read the condition
through the rules API.
  - The audit page filter includes the new resource type.

## Testing

- `WriteRule` and `NewDBStore` tests run against real PostgreSQL. They
cover stale revisions after a reset and a recreate, two concurrent
writers with the same expected revision (exactly one wins), no-ops, and
rollback after a forced error.
- dbauthz method tests and an audit diff test that shows both condition
texts.

Remote dogfood UAT through Coder Agents passed the upgrade from slice 1
(existing state kept, enum value added), a fresh install, unchanged
`/api/v2/experiments`, and the `WriteRule` tests under `-race`. The
licensed audit-page check could not run: the test workspace has no
premium license. That round tested `015979ca96`. The commit after it
only adds `AuditRecord`, and a follow-up UAT round will cover the final
head.

> [!NOTE]
> Migration `000604` was the next free number when this was written.
Recheck it before merging.

## Stack

1. #29869: evaluator library
2. **This PR:** storage and audit types
3. Enforcement and discovery (`/api/v2/experiments`, meta tag, chatd
`mcp-tool-search`, ruleguard)
4. Control plane (experimental API, `coder exp experiment-rules` CLI,
docs)

> [!NOTE]
> This PR was written by an AI agent (Xum).

---
_Generated with [`xum`](https://github.com/coder/xum) • Model:
`anthropic:claude-opus-5-5` • Thinking: `high`_

---------

Signed-off-by: Thomas Kosiewski <tk@coder.com>
2026-09-29 12:22:59 +00:00
Sas Swart 813b8c151f feat: make AI Gateway content recording optional (#30031)
Add `--ai-gateway-disable-content-recording`, which stops user prompts,
tool
calls and model thoughts from being stored. Cost control reads none of
those
tables, so budgets, spend accounting and enforcement are unaffected.

A dropped record is still logged, so pairing the option with
`--ai-gateway-structured-logging-source=gateway` keeps the SIEM export
for
records that are never persisted. The gateway warns at startup when
content is
dropped while coderd is the only emitter, since those records then reach
neither
the database nor a SIEM.

Covered end to end for the embedded and the standalone gateway, and
documented
alongside cost controls.

<details>
<summary>Why the stack is ordered this way</summary>

The final design is a chain of recorder decorators:

    +---------------------+
    |    AsyncRecorder    |  all records except the interception start
    +---------------------+
    |     LogRecorder     |  emit the structured record
    +---------------------+
    | ValidatingRecorder  |  refuse malformed records
    +---------------------+
    |  caller middleware  |  record policy, e.g. drop content
    +---------------------+
    |    TraceRecorder    |
    +---------------------+
    |    DRPCRecorder     |  acquire client, send to coderd
    +---------------------+

Ordering constraints:

- The record type constants (1) are the vocabulary both emitters and the
  validator use, so they come first.
- Validation (5) rejects unset timestamps, so records must already be
stamped
where they are created (3). Stamping at creation leaves
`WrappedRecorder`
  doing nothing but client acquisition, which is why it is folded into
  `DRPCRecorder` (4) and not before.
- coderd's server-time fallback (2) is what keeps a gateway of an older
version
  from persisting zero times once the gateway owns stamping (3).
- PRs 1 to 5 change no user-visible surface. Each deployment option then
lands
with the code that reads it: the log source with gateway-side emission
(6),
content recording with the filter that drops the records (7). Pool
options are
plumbed to the serving pool in 6, where the first option that needs them
  arrives, rather than as an unused hook beforehand.

</details>

---
🤖 Raised by [Coder Agents](https://coder.com) on behalf of @SasSwart.
2026-09-29 11:48:53 +02:00
Sas Swart 23fb35d185 feat: let the AI Gateway emit the structured interception records (#30030)
coderd emitted the structured interception records as they arrived over
DRPC, so
a record the gateway never sends cannot be exported.

- Add `--ai-gateway-structured-logging-source` (`coderd`, `gateway`,
`both`) and
teach the gateway's `LogRecorder` to emit the same format where the
records
originate. Gateway lines omit `thread_parent_id` and `thread_root_id`,
which
  are resolved by a database lookup only coderd can perform.
- Reaching the serving pool required repairing the pool options: they
were
derived at construction sites and discarded, so the server always built
its
pool with the defaults. They are now derived from the deployment
configuration
in one place and passed to the pool that serves requests. The server
reports
those options, and its ownership of the `key_pool_state` collector, so a
second
  registration cannot silently reappear and panic startup.
- The standalone gateway inherits both structured logging options, since
it is
  now one of the processes that can emit.

This is the keystone of the stack: the flag, the mechanism that carries
it and
the behavior it selects land together, so
`TestAIGatewayStart_InheritedOptions`
and the gateway help output stay truthful at every commit.

<details>
<summary>Why the stack is ordered this way</summary>

The final design is a chain of recorder decorators:

    +---------------------+
    |    AsyncRecorder    |  all records except the interception start
    +---------------------+
    |     LogRecorder     |  emit the structured record
    +---------------------+
    | ValidatingRecorder  |  refuse malformed records
    +---------------------+
    |  caller middleware  |  record policy, e.g. drop content
    +---------------------+
    |    TraceRecorder    |
    +---------------------+
    |    DRPCRecorder     |  acquire client, send to coderd
    +---------------------+

Ordering constraints:

- The record type constants (1) are the vocabulary both emitters and the
  validator use, so they come first.
- Validation (5) rejects unset timestamps, so records must already be
stamped
where they are created (3). Stamping at creation leaves
`WrappedRecorder`
  doing nothing but client acquisition, which is why it is folded into
  `DRPCRecorder` (4) and not before.
- coderd's server-time fallback (2) is what keeps a gateway of an older
version
  from persisting zero times once the gateway owns stamping (3).
- PRs 1 to 5 change no user-visible surface. Each deployment option then
lands
with the code that reads it: the log source with gateway-side emission
(6),
content recording with the filter that drops the records (7). Pool
options are
plumbed to the serving pool in 6, where the first option that needs them
  arrives, rather than as an unused hook beforehand.

</details>

---
🤖 Raised by [Coder Agents](https://coder.com) on behalf of @SasSwart.
2026-09-29 11:48:52 +02:00
Nick Vigilante d40e24cf7d docs: nest the CLI reference by subcommand (#29956)
## Summary

Nests the CLI reference by subcommand so the Command Line sidebar
collapses from 156 flat entries to 49 top-level verbs.
Each page's URL follows the invocation, its page title is the full
command as inline code, and its sidebar label is only its own verb as
inline code.

| | Before | After |
| --- | --- | --- |
| File | `docs/reference/cli/oauth2-provider_dcr_disable.md` |
`docs/reference/cli/oauth2-provider/dcr/disable.md` |
| URL | `/reference/cli/oauth2-provider_dcr_disable` |
`/reference/cli/oauth2-provider/dcr/disable` |
| Page title (front matter) | `oauth2-provider dcr disable` | `` `coder
oauth2-provider dcr disable` `` |
| Sidebar label (manifest) | `oauth2-provider dcr disable` | ``
`disable` `` |

Resolves DOCS-140 (coder/coder half). Also fixes the Makefile part of
DOCS-1073 / DOCS-912, which this change depends on.

## Changes

- `scripts/clidocgen`: pages nest by command path. A command with
visible subcommands becomes its directory's `index.md`, so
`oauth2-provider/index.md` and `oauth2-provider/dcr/index.md` sit above
`oauth2-provider/dcr/disable.md`. Subcommand table links are relative to
the parent page.
- `scripts/clidocgen`: the manifest "Command Line" section is built from
the command tree (nested, sorted by name, hidden commands skipped)
instead of a flat list. The redundant `coder` child that pointed back at
`reference/cli/index.md` is gone.
- `Makefile`: the CLI rule now replaces `docs/reference/cli/` wholesale,
so stale pages get removed. The manifest rule now runs `clidocgen
-manifest-only` on top of the API staging manifest, so the CLI nav is
generated instead of edited by hand. As a result, the nine pages that
had no nav entry (`ai-gateway*`, `secret enable/disable`, `server
fix-oidc-links`) now have one.
- `scripts/configdocgen` and 48 prose pages: links point at the new
paths (for example `reference/cli/server.md` is now
`reference/cli/server/index.md`).

## How to review/QA this PR

- `docs/reference/cli/**/*` (approximately 190 pages): Each of these
pages are generated automatically. Some pages appear deleted, and some
pages appear new. Every deleted page corresponds to a new page somewhere
else, so no information is being deleted. The docs in this section
should adhere to the following, so a test in the build preview for each
of these items should be satisfactory:
- [ ] Each subcommand of a command gets nested as a child instead of
being displayed as a flat list.
  - [ ] Each parent command is stored in an `index.md` file.
- [ ] The title of each page inside the page should now feature the full
`coder XYZ` command.
- [ ] The title of each page inside the page should now be formatted as
inline code.
- [ ] The title of each page in the sidebar should be the most granular
subcommand of the whole command string (if the page's title is `coder
ai-gateway keys create`, the sidebar label is `create`).
- [ ] The title of each page in the sidebar should now be formatted as
inline code.
  - [ ] The page slug for each page is now the most granular subcommand.
  - [ ] All links now point to the correct page.
- `docs/manifest.json`: The changes here reflect the updated structure
of the `docs/reference/cli` section.
- `docs/**/*.md` outside of `docs/reference/cli/**/*` (approximately 50
pages): The extent of the changes in these pages are just updating the
paths to point to the new page locations.
- [ ] The links on the page all point to the correct new path in
`docs/reference/cli`.
- `scripts/clidocgen` (4 files): This is the Go code responsible for
generating everything inside of `docs/reference/cli/**/*`. A typical
code review here should be satisfactory.
- `scripts/configdocgen` (2 files): these two files just have updates to
the raw `.md` path used by `docs/admin/setup/configuration-reference.md`
and updates the tests to reflect that.
- `Makefile`: This updates the `make` targets for generating the CLI
docs to fit the new structure.

## Merge ordering

Without the renderer PRs deployed, both docs sites show literal
backticks in titles and sidebar labels. Without the redirects, the old
flat URLs return 404.

1. Deploy before merging this PR: coder/docs-engine#176 (beta-docs
renders these titles as inline code) and coder/coder.com#1111 (classic
docs renders them as inline code). Both are safe to ship first, because
titles without backticks render as before.
2. Merge this PR.
3. Merge coder/coder.com#1112 (redirects from the old flat URLs) only
once this content reaches the mainline release branch that serves
unversioned `/docs`.

## Testing

- `go test ./scripts/clidocgen/ ./scripts/configdocgen/
./scripts/docshtmlcheck/`: pass. New tests cover page paths, subcommand
links, the nested manifest, and front matter quoting.
- `make docs/reference/cli/index.md docs/manifest.json
docs/admin/setup/configuration-reference.md`, then a forced rerun: the
second run produced no diff.
- Checked the manifest: all 164 CLI entries resolve to a file, no page
is missing a nav entry, and everything outside "Command Line" is
byte-identical.
- Relative `.md` links across `docs/`: 0 broken, same as `main`.
- `make pre-commit` and `make pre-push`: pass. On earlier pre-push
attempts, different unrelated vitest files timed out under host load.
Those files pass when run alone, and the final push passed with
`PARALLEL_JOBS=1`.

<details>
<summary>Implementation plan and decision log</summary>

**Goal (from DOCS-140 and the requester):** URLs follow the command
hierarchy. Pages are titled with the full command, and sidebar entries
with the last verb only. Both are formatted as inline code.

**Contract with the renderers:** a title wrapped entirely in one pair of
backticks (``^`[^`]+`$``) renders as inline code. Plain-text consumers
(`<title>`, meta, search, llms corpus) strip the backticks. Page title
comes from front matter `title`, and the sidebar label from the manifest
node `title`.

**Decisions**

- A parent command is `dir/index.md` rather than a sibling `dir.md`. The
root CLI page is already `index.md`, and both docs-engine and the legacy
coder.com renderer map `x/index.md` to `/x`.
- The manifest is built from the command tree, not from the written
files, so ordering is deterministic and the nesting matches the pages
exactly.
- The manifest discard bug (DOCS-1073 item 1) is fixed here, because
without that fix the generated nested manifest would never reach the
tree. DOCS-1073 items 2 through 4 (a prose fix and a hidden-command
policy) are out of scope.
- `-manifest-only` keeps the existing parallel `make gen` layout: the
API rule still owns `_gen/manifest-staging.json`, and CLI regeneration
doesn't retrigger swag.
- The renderer and redirect work lives in the companion PRs in
coder/docs-engine and coder/coder.com. It is linked above and not
duplicated here.

</details>

---

> [!NOTE]
> Generated by Coder Agents on behalf of @nickvigilante.
2026-09-28 15:44:10 -04:00
Matt Vollmer 3ea883b3e5 Merge pull request #28885 from coder/matt/style-guide-coder-workspaces
docs: capitalize Coder Workspaces as a named product
2026-09-28 13:41:34 -04:00
Nick Vigilante d43dd98baf docs: rewrite gerund-leading headings and page titles (#30049)
Rewrites the headings and page titles that `Coder.GerundHeading` flags
as gerund-leading, using the imperative for tasks and the noun form for
concepts.
This PR covers only changes that don't rename a page slug.

## Changes

- Rewrites 121 in-page headings, bringing `Coder.GerundHeading` findings
in `docs/` to zero.
- Adds an empty `<a id="old-slug"></a>` above each renamed heading, so
existing bookmarks and inbound deep links still land on the section.
The legacy IDs were computed with the same slugger the classic renderer
uses (`rehype-slug`), and all 115 that exist on production today match
the live `id` attributes; the other 6 are on pages not published yet.
- Updates the 18 in-docs links that targeted old anchors to use the new
slugs, and the link text that quoted the old heading.
- De-gerunds seven page titles (frontmatter and `manifest.json`) whose
slugs don't change, for example `Upgrading Best Practices` to `Upgrade
best practices`.
- Scopes a Vale exception around the glossary term `Coding agent`, where
"Coding" is an adjective.

## Not in this PR

- **Pages with gerund slugs** (`creating-templates`, `getting-started`,
`working-with-dev-containers`, `cloning-git-repositories`,
`configuring-okta`, and others) keep their current titles, so the title
and slug change together in the slug-rename PR.
  The redirects for those renames come in a third PR.
- **Links outside `docs/`** to old anchors (Go notification strings, an
applied SQL migration, golden files, and the generated `prometheus.md`)
still target old slugs.
They keep working through the legacy anchors, and updating them would
need code changes.

## Known limitation

`coder/docs-engine` prefixes raw-HTML `id` attributes with
`user-content-` (DOM-clobbering protection), and inbound deep links
aren't rewritten.
Once the docs move to docs-engine, these legacy anchors resolve only as
`#user-content-<old-slug>` unless docs-engine adds a fragment fallback.
They work on the current coder.com renderer and on GitHub.

## Testing

- `vale --filter='.Name=="Coder.GerundHeading"' docs`: zero findings,
down from 122.
- `make lint/markdown`, `make lint/docs-html`, `make lint/emdash`, and
the pre-commit hook: all pass.
- Scripted check that every relative `#fragment` link into a changed
file resolves to a heading slug or a legacy anchor (177 links).
- Scripted check that no legacy ID collides with a heading slug on the
same page, and that no untouched heading's duplicate-suffix slug
shifted.

<details>
<summary>Heading renames and legacy anchors (121)</summary>

| File | Old heading | New heading | Legacy anchor |
| --- | --- | --- | --- |
| `admin/integrations/opentofu.md` | Using a custom Terraform binary |
Use a custom Terraform binary | `#using-a-custom-terraform-binary` |
| `admin/monitoring/connection-logs.md` | Capturing/Exporting Connection
Logs | Capture and export connection logs |
`#capturingexporting-connection-logs` |
| `admin/monitoring/metrics.md` | Setting up metrics | Set up metrics |
`#setting-up-metrics` |
| `admin/networking/port-forwarding.md` | Accessing workspace ports |
Access workspace ports | `#accessing-workspace-ports` |
| `admin/networking/port-forwarding.md` | Sharing ports | Share ports |
`#sharing-ports` |
| `admin/networking/port-forwarding.md` | Configuring port protocol |
Configure port protocol | `#configuring-port-protocol` |
| `admin/networking/workspace-proxies.md` | Running on Kubernetes | Run
on Kubernetes | `#running-on-kubernetes` |
| `admin/networking/workspace-proxies.md` | Running on a VM | Run on a
VM | `#running-on-a-vm` |
| `admin/networking/workspace-proxies.md` | Running as a system service
| Run as a system service | `#running-as-a-system-service` |
| `admin/networking/workspace-proxies.md` | Running in Docker | Run in
Docker | `#running-in-docker` |
| `admin/networking/workspace-proxies.md` | Selecting a proxy | Select a
proxy | `#selecting-a-proxy` |
| `admin/security/audit-logs.md` | Capturing/Exporting Audit Logs |
Capture and export audit logs | `#capturingexporting-audit-logs` |
| `admin/security/audit-logs.md` | Purging Old Audit Logs | Purge old
audit logs | `#purging-old-audit-logs` |
| `admin/security/database-encryption.md` | Enabling encryption | Turn
on encryption | `#enabling-encryption` |
| `admin/security/database-encryption.md` | Rotating keys | Rotate keys
| `#rotating-keys` |
| `admin/security/database-encryption.md` | Disabling encryption | Turn
off encryption | `#disabling-encryption` |
| `admin/security/database-encryption.md` | Deleting Encrypted Data |
Delete encrypted data | `#deleting-encrypted-data` |
| `admin/security/secrets.md` | Displaying Secrets | Display secrets |
`#displaying-secrets` |
| `admin/setup/data-retention.md` | Keeping Data Indefinitely | Keep
data indefinitely | `#keeping-data-indefinitely` |
| `admin/setup/index.md` | Migrating from the built-in database to an
external database | Migrate from the built-in database to an external
database |
`#migrating-from-the-built-in-database-to-an-external-database` |
| `admin/setup/index.md` | Configuring Coder behind a proxy | Configure
Coder behind a proxy | `#configuring-coder-behind-a-proxy` |
| `admin/setup/telemetry.md` | Toggling | Turn telemetry on or off |
`#toggling` |
| `admin/templates/creating-templates.md` | Disabling the template
builder | Turn off the template builder |
`#disabling-the-template-builder` |
| `admin/templates/extending-templates/agent-metadata.md` | Managing the
database load | Manage the database load | `#managing-the-database-load`
|
| `admin/templates/extending-templates/docker-in-workspaces.md` |
Authenticating with a Private Registry | Authenticate with a private
registry | `#authenticating-with-a-private-registry` |
| `admin/templates/extending-templates/index.md` | Running scripts on
workspace lifecycle | Run scripts on workspace lifecycle events |
`#running-scripts-on-workspace-lifecycle` |
| `admin/templates/extending-templates/parameters.md` | Validating
parameters | Validate parameters | `#validating-parameters` |
| `admin/templates/extending-templates/prebuilt-workspaces.md` |
Invalidating prebuilds | Invalidate prebuilds |
`#invalidating-prebuilds` |
| `admin/templates/extending-templates/prebuilt-workspaces.md` |
Managing resource quotas | Manage resource quotas |
`#managing-resource-quotas` |
| `admin/templates/extending-templates/prebuilt-workspaces.md` |
Managing prebuild provisioning queues | Manage prebuild provisioning
queues | `#managing-prebuild-provisioning-queues` |
| `admin/templates/extending-templates/prebuilt-workspaces.md` |
Preventing resource replacement | Prevent resource replacement |
`#preventing-resource-replacement` |
| `admin/templates/extending-templates/prebuilt-workspaces.md` |
Preventing prebuild queue contention (recommended) | Prevent prebuild
queue contention (recommended) |
`#preventing-prebuild-queue-contention-recommended` |
| `admin/templates/extending-templates/process-logging.md` | Configuring
custom templates to use workspace process logging | Configure custom
templates to use workspace process logging |
`#configuring-custom-templates-to-use-workspace-process-logging` |
| `admin/templates/extending-templates/process-logging.md` | Viewing
workspace process logs | View workspace process logs |
`#viewing-workspace-process-logs` |
| `admin/templates/extending-templates/process-priority.md` | Verifying
the feature is enabled | Verify the feature is enabled |
`#verifying-the-feature-is-enabled` |
| `admin/templates/extending-templates/resource-metadata.md` | Hiding
resources in the dashboard | Hide resources in the dashboard |
`#hiding-resources-in-the-dashboard` |
| `admin/templates/extending-templates/resource-metadata.md` | Using a
custom resource icon | Use a custom resource icon |
`#using-a-custom-resource-icon` |
| `admin/templates/extending-templates/resource-ordering.md` | Using
"order" property | Use the "order" property | `#using-order-property` |
| `admin/templates/extending-templates/resource-persistence.md` |
Disabling persistence | Turn off persistence | `#disabling-persistence`
|
| `admin/templates/index.md` | Extending templates | Extend templates |
`#extending-templates` |
| `admin/templates/managing-templates/change-management.md` | Testing
and Publishing Coder Templates in CI/CD | Test and publish Coder
templates in CI/CD | `#testing-and-publishing-coder-templates-in-cicd` |
| `admin/templates/managing-templates/index.md` | Creating templates |
Create templates | `#creating-templates` |
| `admin/templates/managing-templates/index.md` | Editing templates |
Edit templates | `#editing-templates` |
| `admin/templates/managing-templates/index.md` | Updating templates |
Update templates | `#updating-templates` |
| `admin/templates/troubleshooting.md` | Debugging the startup script |
Debug the startup script | `#debugging-the-startup-script` |
| `admin/users/groups-roles.md` | Creating custom roles | Create custom
roles | `#creating-custom-roles` |
| `admin/users/index.md` | Configuring SSO | Configure SSO |
`#configuring-sso` |
| `admin/users/index.md` | Resetting a password on Kubernetes | Reset a
password on Kubernetes | `#resetting-a-password-on-kubernetes` |
| `admin/users/quotas.md` | Establishing Costs | Establish costs |
`#establishing-costs` |
| `admin/users/quotas.md` | Establishing Budgets | Establish budgets |
`#establishing-budgets` |
| `admin/users/sessions-tokens.md` | Creating tokens with scopes |
Create tokens with scopes | `#creating-tokens-with-scopes` |
| `ai-coder/agent-firewall/index.md` | Getting Started with Agent
Firewall | Get started with Agent Firewall |
`#getting-started-with-agent-firewall` |
| `ai-coder/agent-firewall/index.md` | Viewing Audit Logs | View audit
logs | `#viewing-audit-logs` |
| `ai-coder/agent-firewall/nsjail/k8s.md` | Running without user
namespaces | Run without user namespaces |
`#running-without-user-namespaces` |
| `ai-coder/agent-firewall/version.md` | Using Coder Before v2.30.0 with
Claude Code Module v4.7.0+ | Coder before v2.30.0 with Claude Code
module v4.7.0+ |
`#using-coder-before-v2300-with-claude-code-module-v470` |
| `ai-coder/agent-firewall/version.md` | Using Claude Code Module Before
v4.7.0 | Claude Code module before v4.7.0 |
`#using-claude-code-module-before-v470` |
| `ai-coder/agents/getting-started.md` | Providing feedback | Provide
feedback | `#providing-feedback` |
| `ai-coder/agents/models.md` | Managing personal API keys | Manage
personal API keys | `#managing-personal-api-keys` |
| `ai-coder/agents/models.md` | Removing a personal key | Remove a
personal key | `#removing-a-personal-key` |
| `ai-coder/agents/models.md` | Using an LLM proxy | Use an LLM proxy |
`#using-an-llm-proxy` |
| `ai-coder/agents/platform-controls/git-providers.md` | Checking logs |
Check logs | `#checking-logs` |
| `ai-coder/ai-gateway/audit.md` | Navigating the UI | Navigate the UI |
`#navigating-the-ui` |
| `ai-coder/ai-gateway/audit.md` | Conducting a forensic audit | Conduct
a forensic audit | `#conducting-a-forensic-audit` |
| `ai-coder/ai-gateway/clients/jetbrains.md` | Using the AI Assistant |
Use the AI Assistant | `#using-the-ai-assistant` |
| `install/operate/upgrade/best-practices.md` | Diagnosing liveness
probe issues | Diagnose liveness probe issues |
`#diagnosing-liveness-probe-issues` |
| `install/operate/upgrade/best-practices.md` | Recovering from failed
database migrations | Recover from failed database migrations |
`#recovering-from-failed-database-migrations` |
| `install/operate/upgrade/esr-2.24-2.29-upgrade.md` | Upgrading |
Upgrade recommendations | `#upgrading` |
| `install/operate/upgrade/esr-2.29-2.34-upgrade.md` | Upgrading |
Upgrade recommendations | `#upgrading` |
| `install/prepare/licensing.md` | Adding your license key | Add your
license key | `#adding-your-license-key` |
| `install/server/cloud/azure-vm.md` | Creating and Uploading Your First
Template | Create and upload your first template |
`#creating-and-uploading-your-first-template` |
| `install/server/cloud/compute-engine.md` | Configuring the control
plane | Configure the control plane | `#configuring-the-control-plane` |
| `reference/releases.md` | Installing stable | Install stable |
`#installing-stable` |
| `start/first-workspace.md` | Creating your first coder workspace |
Create your first Coder workspace |
`#creating-your-first-coder-workspace` |
| `start/local-deploy.md` | Setting up a Coder deployment | Set up a
Coder deployment | `#setting-up-a-coder-deployment` |
| `tutorials/best-practices/organizations.md` | Managing Organizations
at Scale | Manage organizations at scale |
`#managing-organizations-at-scale` |
| `tutorials/example-guide.md` | Adding Photos | Add photos |
`#adding-photos` |
| `tutorials/example-guide.md` | Setting the author data | Set the
author data | `#setting-the-author-data` |
| `tutorials/example-guide.md` | Setting up the routes | Set up the
routes | `#setting-up-the-routes` |
| `tutorials/persistent-shared-workspaces.md` | Finding shared
workspaces | Find shared workspaces | `#finding-shared-workspaces` |
| `tutorials/reverse-proxy-caddy.md` | Getting started | Get started |
`#getting-started` |
| `tutorials/reverse-proxy-caddy.md` | Generating wildcard certificates
| Generate wildcard certificates | `#generating-wildcard-certificates` |
| `tutorials/reverse-proxy-nginx.md` | Adding Coder deployment subdomain
| Add the Coder deployment subdomain |
`#adding-coder-deployment-subdomain` |
| `tutorials/testing-templates.md` | Creating the headless user | Create
the headless user | `#creating-the-headless-user` |
| `user-guides/desktop/desktop-connect-sync.md` | Accessing web apps in
a secure browser context | Access web apps in a secure browser context |
`#accessing-web-apps-in-a-secure-browser-context` |
| `user-guides/desktop/index.md` | Testing Your Connection | Test your
connection | `#testing-your-connection` |
| `user-guides/desktop/index.md` | Getting Help | Get help |
`#getting-help` |
| `user-guides/desktop/index.md` | Uninstalling | Uninstall Coder
Desktop | `#uninstalling` |
| `user-guides/devcontainers/index.md` | Getting started | Get started |
`#getting-started` |
| `user-guides/devcontainers/troubleshooting-dev-containers.md` |
Finding your dev container agent | Find your dev container agent |
`#finding-your-dev-container-agent` |
| `user-guides/devcontainers/troubleshooting-dev-containers.md` |
Getting more help | Get more help | `#getting-more-help` |
| `user-guides/devcontainers/working-with-dev-containers.md` | Using the
Coder CLI | Use the Coder CLI | `#using-the-coder-cli` |
| `user-guides/devcontainers/working-with-dev-containers.md` | Using
OpenSSH (config-ssh) | Use OpenSSH (config-ssh) |
`#using-openssh-config-ssh` |
| `user-guides/devcontainers/working-with-dev-containers.md` | Exposing
ports on the parent workspace | Expose ports on the parent workspace |
`#exposing-ports-on-the-parent-workspace` |
| `user-guides/devcontainers/working-with-dev-containers.md` |
Rebuilding dev containers | Rebuild dev containers |
`#rebuilding-dev-containers` |
| `user-guides/shared-workspaces.md` | Getting Started | Get started |
`#getting-started` |
| `user-guides/shared-workspaces.md` | Sharing your Workspace | Share
your workspace | `#sharing-your-workspace` |
| `user-guides/shared-workspaces.md` | Using a shared workspace | Use a
shared workspace | `#using-a-shared-workspace` |
| `user-guides/shared-workspaces.md` | Accessing workspace apps in
shared workspaces | Access workspace apps in shared workspaces |
`#accessing-workspace-apps-in-shared-workspaces` |
| `user-guides/workspace-access/emacs-tramp.md` | Connecting To A
Workspace | Connect to a workspace | `#connecting-to-a-workspace` |
| `user-guides/workspace-access/emacs-tramp.md` | Using SSH | Use SSH |
`#using-ssh` |
| `user-guides/workspace-access/index.md` | Running remote commands with
quoting | Run remote commands with quoting |
`#running-remote-commands-with-quoting` |
| `user-guides/workspace-access/jetbrains/gateway.md` | Configuring the
Gateway plugin to use internal certificates | Configure the Gateway
plugin to use internal certificates |
`#configuring-the-gateway-plugin-to-use-internal-certificates` |
| `user-guides/workspace-access/jetbrains/gateway.md` | Using an
existing JetBrains installation in the workspace | Use an existing
JetBrains installation in the workspace |
`#using-an-existing-jetbrains-installation-in-the-workspace` |
| `user-guides/workspace-access/port-forwarding.md` | Accessing
workspace ports | Access workspace ports | `#accessing-workspace-ports`
|
| `user-guides/workspace-access/port-forwarding.md` | Sharing ports |
Share ports | `#sharing-ports` |
| `user-guides/workspace-access/port-forwarding.md` | Configuring port
protocol | Configure port protocol | `#configuring-port-protocol` |
| `user-guides/workspace-access/vscode.md` | Using the public extensions
marketplaces | Use the public extensions marketplaces |
`#using-the-public-extensions-marketplaces` |
| `user-guides/workspace-access/vscode.md` | Adding extensions to custom
images | Add extensions to custom images |
`#adding-extensions-to-custom-images` |
| `user-guides/workspace-access/vscode.md` | Installing extensions using
its `vsix` file at the command line | Install extensions using a `vsix`
file at the command line |
`#installing-extensions-using-its-vsix-file-at-the-command-line` |
| `user-guides/workspace-access/vscode.md` | Installing from a
marketplace at the command line | Install from a marketplace at the
command line | `#installing-from-a-marketplace-at-the-command-line` |
| `user-guides/workspace-access/vscode.md` | Using VS Code Desktop | Use
VS Code Desktop | `#using-vs-code-desktop` |
| `user-guides/workspace-access/web-terminal.md` | Accessing the
Terminal | Access the terminal | `#accessing-the-terminal` |
| `user-guides/workspace-lifecycle.md` | Stopping workspaces | Stop
workspaces | `#stopping-workspaces` |
| `user-guides/workspace-lifecycle.md` | Deleting workspaces | Delete
workspaces | `#deleting-workspaces` |
| `user-guides/workspace-management.md` | Creating workspaces | Create
workspaces | `#creating-workspaces` |
| `user-guides/workspace-management.md` | Updating workspaces | Update
workspaces | `#updating-workspaces` |
| `user-guides/workspace-management.md` | Updating via the CLI | Update
with the CLI | `#updating-via-the-cli` |
| `user-guides/workspace-management.md` | Starting and stopping
workspaces | Start and stop workspaces |
`#starting-and-stopping-workspaces` |
| `user-guides/workspace-management.md` | Repairing workspaces | Repair
workspaces | `#repairing-workspaces` |
| `user-guides/workspace-scheduling.md` | Working hours | Work schedule
| `#working-hours` |
| `user-guides/workspace-scheduling.md` | Basing solely on activity
detection | Rely solely on activity detection |
`#basing-solely-on-activity-detection` |

</details>

<details>
<summary>Plan</summary>

The de-gerund work ships as three PRs:

1. This PR: in-page headings and page titles that do not require a page
slug rename.
1. Page slug renames for pages whose filenames are gerunds.
1. Redirects for the renamed slugs.

Heading rewrites follow the style guide section "No gerund-leading
headings": imperative for task headings, noun form for concept headings,
sentence case, and "turn on"/"turn off" instead of "enable"/"disable"
per word-choice guidance.
The legacy anchor sits on its own line above the heading (with a blank
line between) rather than inside the heading, so it does not leak into
heading text, TOC entries, or Fumadocs slugs.

</details>

---

_Generated by Coder Agents on behalf of @nickvigilante._
2026-09-28 13:40:07 -04:00
Nick Vigilante 88aa2cc373 feat: enable Coder.UnitSpacing (#29944)
## Summary

Adds `Coder.UnitSpacing`, a Vale rule that enforces the style guide's
[non-breaking space between number and
unit](https://github.com/coder/coder/blob/main/docs/.style/style-guide/numbers-units-and-dates.md#non-breaking-space-between-number-and-unit)
policy.
Until now, the guide pointed at `Google.Units (planned)`, but that rule
accepts a regular space, so it can't enforce the policy.

Resolves [DOCS-1072](https://linear.app/codercom/issue/DOCS-1072).

## Changes

- **Cleanup commit**: replaces the regular space (or missing space) with
`&nbsp;` in 189 prose findings across 55 files. One config default,
`(default: 15s)`, moves to code font instead, as the guide requires for
configuration values. One table row that was realigned also swaps a
pre-existing en dash for a hyphen, since `lint/emdash` checks changed
lines.
- **Enable commit**: adds `docs/.style/styles/Coder/UnitSpacing.yml` at
`warning`, updates the enforcement footer in
`numbers-units-and-dates.md`, and updates the coverage tables in the
style guide README.
- **Reflow commit**: every hard-wrapped paragraph the cleanup touched
(45 paragraphs in 29 files) is rewrapped to one sentence per line.
Joining lines exposed units split across a line break, which now use
`&nbsp;`, and two em dashes on rewritten lines are reworded.
- **Rule fix commit**: the token now matches ASCII whitespace, including
a newline, between the number and the unit, so a hard-wrapped paragraph
can't hide a missing `&nbsp;`. The class is spelled out because Vale's
`\s` is Unicode and would match U+00A0. Vale can't locate a match that
spans list indentation or a blockquote marker, so splits there still go
unreported.
- **Rule count sync**: the tooling paragraph in the style guide README
now reads 79 rules, 9 tool-checked, to match the coverage table. The 79
corrects drift already on `main` since #29758; the 9 is this PR's new
rule.
- `.vale.ini` turns the rule off for pages generated from Go source:
`docs/reference/{api,cli}/*.md`, `configuration-reference.md`, and
`prometheus.md`. That text comes from flag descriptions, Swagger
comments, and metric help text, which also render outside Markdown,
where `&nbsp;` would show up literally.

<details>
<summary>Rule design decisions</summary>

- An `existence` rule matches `\d+(\.\d+)?` followed by a regular space
or no space, then a unit from a curated list (time, data size,
bandwidth, frequency, vCPU/CPU/cores).
- Vale renders Markdown before matching, so `&nbsp;` and a literal
U+00A0 both pass. Code spans and fences are skipped.
- Hyphenated compound modifiers (`12-hour clock`) don't match, because
the token allows only a space or nothing between the number and the
unit.
- Exceptions cover HTTP status plurals (`413s`) and decades (`1990s`).
- Severity is `warning`, because the unit list is curated and a count
followed by a unit-like word can still be a judgment call.
- Alternative considered: a `BlockIgnores` pattern for the `<!-- Code
generated ... -->` regions. I didn't use it because it would silence
every rule in those regions, not just this one.

</details>

## Testing

- Ran the rule against fixtures: `30 seconds`, `150ms`, `4 vCPU` in a
table, and `16` / `GB` split across lines in a paragraph all flag.
`30&nbsp;seconds`, literal U+00A0, `12-hour`, `413s`, `1990s`, and ``
`30s` `` don't.
- `vale docs/` reports 0 `Coder.UnitSpacing` findings, and the counts
for every other rule match `main`.
- A scratch config with `Coder.OneSentencePerLine` turned on reports 0
findings on changed lines.
- `make lint/markdown`, `make lint/style-claims`, `make lint/emdash`,
and the `pre-commit-light` hook pass.

<details>
<summary>CI flake note</summary>

`Storybook` failed on b3c53b6874 after capturing all 3,421 snapshots,
when the Pixel build was marked `failed` during finalization. This PR
changes no files under `site/`. The re-run failed the same way, and
`Storybook` is failing in the same Pixel step on the latest `main`
commits, so this isn't caused by this PR.

</details>

---

*Generated by [Coder Agents](https://coder.com/docs/ai-coder/agents) on
behalf of @nickvigilante.*
2026-09-28 12:29:40 -04:00
Jon Ayers 797dc6b2d1 feat: refresh header commands based on JWT expiration (#29760)
Adds opportunistic JWT parsing for values returned from the
`--header-command`. If a JWT is parsed we use the value of its `exp`
field to determine when we should re-run the command to refresh the
values.
2026-09-28 09:42:31 -05:00
Jake Howell d853893e8a feat: filter agent chats by chat status (#30009)
> 🤖 This PR was written by Coder Agents on behalf of Jake Howell.

The sidebar's `Chat status` filter only offered `Read`/`Unread`. This
turns it into a real status filter backed by the `chat_status` enum, the
same value the row icon already shows. Stacked on #30006.

- New `status:<waiting|running|error|requires_action|interrupting>`
search filter (repeated or comma-separated) plus a `chat_statuses` param
on `GetChats`.
- Sidebar `Status` submenu offers `Requires action`, `Error`, `Working`
and `Idle`; `Working` covers `interrupting`, since stopping a turn is
too brief to be worth its own option. A full selection emits no filter.
- `Unread` moves out to its own checkbox (`unread=true` in the URL), so
it narrows a status selection instead of competing with it.
- Grouping by status now sections by the five statuses instead of
`Unread`/`Read`, reusing `getChatStatusDisplay` for labels and icons.

<img width="439" height="177" alt="image"
src="https://github.com/user-attachments/assets/82ef2ef0-cde9-4169-bb29-caa7b9bfdb9e"
/>
2026-09-28 19:58:35 +10:00
Michael Suchacz f5092aaa4a feat: make chat limits configurable deployment options (#28927)
Adds deployment options for the chat limits that shape turn behavior and
API acceptance, replacing hardcoded constants in `coderd/x/chatd` and
the chat API. Defaults are unchanged.

| Option | Default | Limit |
|---|---|---|
| `CODER_CHAT_MAX_STEPS_PER_TURN` | 1200 | steps (model responses) in a
chat turn |
| `CODER_CHAT_MAX_GENERATION_RETRIES` | 25 | consecutive retries after a
model generation fails with a transient error |
| `CODER_CHAT_MAX_QUEUED_MESSAGES_PER_CHAT` | 20 | messages that can be
queued in a chat |
| `CODER_CHAT_MAX_ATTACHMENTS_PER_CHAT` | 50 | files linked to a chat;
linking more deletes the earliest uploads |
| `CODER_CHAT_MAX_PROMPT_BYTES` | 131072 | system prompt, plan mode
instructions, and each user's custom prompt |
| `CODER_CHAT_MAX_CONCURRENT_RECORDING_UPLOADS` | 25 | desktop
recordings each server stores at the same time |

`codersdk.DefaultChat*` constants remain the single source of truth.
Values below 1 fail startup validation, and each option's description
ends with "Must be at least 1." `chatd.New` fills any zero field in
`chatd.Config.Limits` with its default once, `LimitsFromConfig` is a
plain conversion, and the code that receives a limit as a parameter (the
`chatstate` queue and file link checks, the turn step check,
`chatretry.Retry`, and `chatadvisor.NewRuntime`) returns an error for a
limit below 1 instead of choosing a default or disabling the limit. The
options are documented in the generated configuration reference and in
the platform controls docs.

`CODER_CHAT_MAX_GENERATION_RETRIES` counts consecutive retries, and the
count resets after each successful step. The default allows 25 retries
(26 attempts) where the old constants allowed 24. The same limit now
applies to each nested advisor model call and to background title,
summary, and turn status label generation, which previously used fixed
`chatretry` budgets.

Chat creation and tool result bodies keep the fixed 256 KiB limit from
main. The prompt-saving endpoints accept bodies up to twice the prompt
limit, for JSON escaping and characters that sanitization removes, but
never less than 256 KiB, so small prompt limits still return the 400
length error. At the default this equals the 256 KiB limit on main.

Four settings from earlier revisions were removed, and the fixed limits
from main are back:

- `CODER_CHAT_MAX_TOOL_OUTPUT_BYTES`: the agent already keeps a 16 KiB
head and a 16 KiB tail of command output, so raising it had no effect
and lowering it cut the tail.
- `CODER_CHAT_MAX_DYNAMIC_TOOLS_PER_CHAT`: tool definitions share the
256 KiB chat creation body limit, so raising the count did little.
- `CODER_CHAT_DEBUG_MAX_BODY_BYTES`: one setting covered two unrelated
debug caps.
- `CODER_CHAT_DEBUG_MAX_TEXT_RUNES`: the name did not say what it
applied to.

Root and subagent concurrency caps stay fixed because they are licensing
behavior, and `MaxChatFileSizeBytes` stays fixed because the web UI
hardcodes the generated constant for client-side checks.
`codersdk.MaxChatFileIDs` is removed; the web UI's "Attachment expired"
tooltip no longer quotes the number because the cap is now per
deployment, and it says that attaching a file beyond the limit
permanently deletes the chat's earliest-uploaded attachments.

## Review record

| Round | Reviewed head | Result | Disposition |
|---|---|---|---|
| Codex 1 and 2 (Sep 2 to 3) | `7f10a1572f8`, `8ee09f8fa3b`,
`197bb78d5b` | 10 findings, then OK on `197bb78d5b` | all threads
resolved |
| Codex 3 (Sep 17) | `e4efac249a5` (pre-rebase) | 4 findings | advisor
retry limit confirmed and fixed in `9e462b7b3d0` (rebased from
`67341e458e8`); ARCHITECTURE.md TODOs added; JSON-escaping body sizing
and streamed-argument rune cap declined as pre-existing design (evidence
in threads) |
| Codex 4 (Sep 18) | `9e462b7b3d0` | 6 findings | recording evicted at
attachment cap 1 confirmed and fixed in `5b61895decb`; `Limits` field
docs and zero-value fallback documented; prompt retro-enforcement,
generated multi-sentence lines, and tool-output truncation metadata
declined as pre-existing design (evidence in threads) |
| Codex 5 (Sep 18) | `5b61895decb` | 1 finding | over-cap batch of
already-linked files accepted after lowering the cap: confirmed and
fixed in `f44063e74e5` |
| mafredri (Sep 23) | `f44063e74e5` | 24 threads, changes requested |
all fixed in `05e3e3d622a`, `c1f78e09e8b`, `709ddb67977`, `d0587a49829`,
`ca4347b24de`, and `1f6c9e2a46f`, then answered and resolved; the
ARCHITECTURE.md text was written at the author's direction and approved
by the author |
| Sibling sweep (Sep 24) | `1f6c9e2a46f` | author-requested audit of all
24 mafredri threads for sibling issues, plus a test refactor | fixed in
`37eaf07d34d` through `1f14ac041b7`: the advisor retry limit,
`chatretry.Retry`, and the turn step check reject values below 1 instead
of disabling retries or the limit; limit tests run against both the
default and configured values set through `chatd.Config` or
`DeploymentValues`; the expired-attachment tooltip is concrete. A
required coder-frontend-review run (8 roles in one agent, CD re-run
once) found a stale story comment, removed. |
| Codex 6 (Sep 27) | `a71383e3a31` | OK, no findings | requested after
the rebase at the author's direction, past the six-pass review budget |

The branch was rebased onto main `4851c7b60c8` on Sep 27; the previous
head was `91b84000adb`, and the earlier SHAs in the review record
predate the rebase. Conflicts in the `chatstate` transitions and
`CreateChat` keep both main's `InitialStatus` and this PR's
`MaxFileLinks`, and main's rewrite of `advisor_internal_test.go` in
#28754 keeps main's version plus this PR's limit tests. Two tests added
on main needed the new retry arguments:
`TestGenerateStructuredTitleWithUsage_FallsBackToTextWhenToolChoiceRejected`
and `TestAdvisorRunStreamsReasoningDeltasSeparatelyFromAdvice`.
Validation on `a71383e3a31`: the pre-commit hook (generation,
golangci-lint, build), the full `coderd/x/chatd/...` suite (20
packages), the chat tests in `codersdk`, `coderd`, and
`enterprise/coderd`, the CLI help tests, race-detector runs of the
`chatd`, `chatstate`, `chatadvisor`, and `chatretry` packages, and `go
build` plus `go vet` on each of the 27 commits. No remote UAT was run.

> Xum acted on behalf of @ibetitsmike for this pull request.
2026-09-28 09:25:01 +00:00
Jake Howell 4f2fd36e8f feat: add pr_status:none filter for chats without a pull request (#30006)
> 🤖 This PR was written by Coder Agents on behalf of Jake Howell.

Adds `none` to the `pr_status` chat filter, matching chats with no
linked pull request. Stacked on #30005.

- `none` means no diff-status row, or a row whose `pull_request_state`
is null/empty (so chats whose PR was cleared still match), and it ORs
with the other statuses, e.g. `pr_status:none,open`.
- Frontend picks it up from the shared `CHAT_LIST_PR_STATUS_ORDER`,
shown as `No PR`; `searchQuery.ts` now derives its valid set from that
list instead of a duplicated literal.
- Swagger, API docs and the `list_chats` tool schema
regenerated/updated.

<img width="508" height="464" alt="image"
src="https://github.com/user-attachments/assets/bd6c70e3-c634-499d-ae16-e7953f6da2f9"
/>
2026-09-28 19:14:12 +10:00
Jake Howell cdf50f8b2c feat: add mark as read and unread to agent chat menus (#30015)
> 🤖 This PR was written by Coder Agents on behalf of Jake Howell.

The chat read cursor only moved when a chat's stream connected or
disconnected, so there was no way to clear an unread dot without opening
the chat, or to flag a chat to come back to.

`UpdateChatRequest` gains a `read` field that either advances the
owner's read cursor to the latest assistant message or clears it, and
the agents sidebar exposes it as a **Mark as read** / **Mark as unread**
item directly under **Show subagents** in both the right-click and the ⋮
menus.

Notes:

- The cursor is owner-scoped, so `PATCH /api/v2/chats/{chat}` returns
403 for `read` when the caller is not the owner, even when they may
otherwise update the chat.
- The item is hidden for the chat that is already open, because opening
a chat marks it read and would immediately undo the toggle. That also
matches the sidebar, which never shows an unread dot for the active
chat.

<img width="292" height="215" alt="image"
src="https://github.com/user-attachments/assets/31e9e249-70ea-4582-9391-66c4c51621b9"
/>

<details>
<summary>Implementation notes</summary>

Backend:

- `UpdateChatLastReadMessageID` takes a nullable `last_read_message_id`;
`NULL` clears the cursor so every assistant message counts as unread
again.
- `markChatAsRead` (stream connect/disconnect) now wraps
`advanceChatReadCursor`; `clearChatReadCursor` is the new unread path.
Both return errors so the HTTP handler can report failures instead of
only logging them.

Frontend:

- `markChatRead` / `markChatUnread` mutations mirror `pinChat` /
`unpinChat`: optimistic `has_unread` update, rollback plus invalidation
on error, invalidation on settle.
- `onMarkChatRead` / `onMarkChatUnread` thread from `AgentsPageLayout`
through `ChatsSidebar` → `ChatsPanel` → `ChatTreeContext` →
`ChatTreeNode`. `ChatTopBar` deliberately does not pass them, since it
only ever renders the active chat's menu.

Checks run: `make gen`, `make fmt`, `golangci-lint run ./coderd/...`,
`go test ./coderd -run TestChatReadState`, `go test ./coderd -run
'TestSharedReaderStreamChat|TestChatPinOrder'`, `go test
./coderd/database -run TestChatHasUnread`, `go test
./coderd/database/dbauthz -run TestMethodTestSuite`, `tsc --noEmit`,
`biome check`, and the AgentsPage Vitest unit and Storybook projects.

</details>
2026-09-28 18:57:57 +10:00
Spike Curtis 4f372cef02 feat: accept include_related on get workspace by owner and name (#29855)
Adds `include_related` support to `GET
/api/v2/users/{user}/workspace/{workspacename}`
(`API.workspaceByOwnerAndName`), matching the get-workspace-by-ID
endpoint.

- Parses `include_related` via `wsrelated.Parse`; absent defaults to
`wsrelated.All()`, present-but-invalid returns 400.
- Passes the parsed config to `singleWorkspaceData`, preserving template
concealment (unauthorized template maps to 404 on this route).
- Omitted related data (build/template) is converted from zero values;
the build-not-found 404 only applies when the build was requested.
- Adds `TestWorkspaceByOwnerAndNameIncludeRelated` covering full,
template-only, latest-build-only, and invalid selections.
- Regenerated API docs/swagger.

_This PR was created by Coder Agents on behalf of @spikecurtis._
2026-09-28 09:05:48 +02:00
Michael Suchacz 6826da9397 feat: restore agents-access as a default organization role (#30004)
Restores `agents-access` (**Coder Agents User**) as a built-in
organization role and adds it to every organization's
`default_org_member_roles`. Members keep Coder Agents by default, and
admins can now restrict it per organization by removing the role from
the defaults and granting it through IdP role sync or direct assignment.

Since #28186, chat permissions lived in the organization-member floor,
so the only way to limit Coder Agents was narrowing per-model access
lists, which did not hide the feature.

- Migration 000602 appends `agents-access` to every organization's
defaults, so upgrading keeps every member's access. New organizations
get it from `rbac.DefaultOrgMemberRoles()`.
- Service accounts do not inherit the role from the defaults
(`GetAuthorizationUserRoles`), so they still need an explicit grant for
chat.
- Owners and Organization Admins keep chat access regardless of
defaults. Chats shared with a user stay readable without the role.
- Role sync is unchanged. It does not store default roles, so after the
default is removed a mapped user gets `agents-access` at their next
sign-in.
- The retired-role mechanism (`IsRetiredRoleName`) is removed.
- `PATCH /api/v2/organizations/{organization}` rejects duplicate
`default_org_member_roles` entries (the CLI already de-duplicated them).
- Custom organization role requests treat built-in role names
case-insensitively, since custom role names are stored lowercase and
`Agents-Access` would otherwise become an undeletable shadow of the
built-in role.
- The Agents permission alert tells restricted members their chats are
kept, and the model selector for users without chat permission no longer
claims that no models are configured.

Docs add "Control who can use Coder Agents" to the Agents
getting-started guide.

**NOTE**: Migration 000602 deletes custom roles named `agents-access`,
which the built-in role would shadow. The down migration does not
restore them. Stored member grants of `agents-access` from the earlier
built-in role or a deleted custom role stay and now grant chat access.

## Validation

- Remote dogfood
[UAT](https://dogfood.cdr.dev/agents/e1c18dc6-f6f0-49a1-b6cd-6ce014b51a86)
passed on fb441dfae5, covering case variants of built-in role names on
create, update, delete, default roles, and member grants. The previous
round, on a6fef66b3f, passed the upgrade from main 5dde49dffb on a
fresh database. 6b7f107e0b only changes wording (docs, comments, UI
copy, CLI help) and did not go through UAT.
- Local: rbac, dbauthz, idpsync, migrations (chain including 000602 down
and up), querier, httpmw, provisionerdserver, coderd and enterprise
chat, role, and organization tests, chatd, toolsdk, CLI; frontend
vitest, story tests, biome, oxlint, tsc.

## Known issues (not changed here)

- Sending from a chat page that was already open when access was removed
shows a generic 404 panel until reload.
- The members page role editor is not locked for OIDC users under org
role sync; the API rejects the change with 400.
- Creating a custom role named after a system role
(`organization-member`, `organization-service-account`) returns 400 with
a raw database unique-constraint error.

<details>
<summary>Review record</summary>

- Remote UAT (UAT Critic sub-agent `6636c855ec`): round 1 on 8bec029d35
passed with issues, fixed in d7ba937a10 and e0f16e1a45f; round 2 on
a6fef66b3f passed; round 3 on fb441dfae5 passed.
- Codex: round 1 on a6fef66b3f found one P2 (case variants of built-in
role names), fixed in fb441dfae5 with a red-green test. Rounds 2 and 3
on fb441dfae5 found no major issues.
- mafredri on fb441dfae5 (PR text only): nine wording suggestions
applied in 6b7f107e0b9; NOTE extended for stored grants; description
trimmed.
- Frontend: FE1 to FE10 and coder-frontend-review checkpoints
self-audited.

</details>

> 🤖 This PR was opened by [Xum](https://mux.coder.com) on behalf of
@ibetitsmike.
2026-09-27 23:34:26 +02:00
Michael Suchacz 756ffb97af feat: add a collapse_assistant_steps user preference (#29416)
## Stack context

Bottom of a six-PR stack that adds the **Collapse assistant steps** chat
preference (Agents > Settings, off by default). With it on, each turn's
consecutive tool-step rows fold into one disclosure: "Worked for 2m 14s
(7 steps)" once the turn completes, or a ticking "Working for 12s" while
it runs. The stack was split out of #29115 for review size; #29115 now
sits at the top with the full feature description and the UAT record.

1. #29416 feat: add a collapse_assistant_steps user preference (this PR)
2. #29417 feat(site): group assistant steps into working blocks
3. #29418 feat(site): add the working block disclosure
4. #29419 feat(site): fold assistant steps in the conversation timeline
5. #29420 fix(site): keep streaming text alive inside expanded working
blocks
6. #29115 feat(site): add the collapse assistant steps chat preference

## Why

The chat UI reads a per-user boolean to decide whether to fold steps.
This layer stores it and exposes it through the preference settings API
and SDK.

`collapse_assistant_steps` follows the existing
`task_notification_alert_dismissed` boolean pattern: a `user_configs`
key with dbauthz wrappers, no migration. The generated API docs and
TypeScript types are regenerated, and the frontend preference mocks gain
the new required field.

> This PR was prepared by Xum, an AI coding agent, on behalf of
@ibetitsmike.
2026-09-27 22:15:10 +02:00
Michael Suchacz 0eed5465f2 feat: allow creating chats without an initial message (#27111)
> Written by Mux on behalf of Mike.

## What

`POST /api/v2/chats` now accepts an empty `content` array. The chat is
created idle (`waiting`) with system messages only: no user message is
inserted, no ownership hint is published, and no chat worker picks it
up. Generation starts when the first message is POSTed to
`/chats/{chat}/messages`.

## Why

The new-chat page needs to upload files into the chat's workspace before
the first turn, and `POST /chats/{chat}/workspace-files` requires a chat
ID. There was previously no way to sequence "create chat, upload files,
send first message": creation required non-empty content and started
generation immediately. This PR adds the enabling primitive; the UI
lands in the next PR of the stack.

## How

- `chatstate.CreateChat` takes an explicit `InitialStatus` (`waiting` or
`running`, validated). The existing `IsRunnable()` gate keeps ownership
hints suppressed for `waiting` chats.
- `chatd.CreateChat` derives the status from `InitialUserContent`: empty
content means `waiting` with system messages only, and `APIKeyID` is
only required when a user message is inserted.
- `createChatInputFromRequest` returns empty blocks for empty content
instead of rejecting; the `/messages` path still rejects empty sends.
- Chats created this way carry the `New Chat` placeholder title. Title
generation now treats that placeholder as replaceable. When the first
message lands on such a chat, `chatd.SendMessage` detects the first user
turn inside its transaction (under the chat row lock), writes the
fallback title in the same transaction, and reports `FirstUserTurn`;
`postChatMessages` then fires `GenerateChatTitleForMessagesAsync` to
upgrade it. A failed title call therefore still leaves a meaningful
title.
- `ARCHITECTURE.md` carries `TODO (#27111)` items in the transition list
and the `POST /api/v2/chats` section for the new `N -> Create -> W`
transition (the doc text and the diagram edge are left for the author
per the chatd guardrail).

## Follow-ups

- Automatic title generation (both the create path and the first-message
path added here) writes the generated title unconditionally, so a user
rename that lands while the title model call is in flight is
overwritten; a compare-and-set title update would close that
pre-existing window.
- `chats.last_reasoning_effort` is derived from inserted messages, so an
idle chat created with `reasoning_effort` does not persist it until its
first message; the first message applies the owner's personal
reasoning-effort override (when it targets the same model) if the
request omits an effort, matching `POST /chats` with content.

## Testing

- chatstate: `N -> W` lands in `StateW` with no ownership hint; invalid
initial statuses are rejected.
- chatd: empty create produces a `waiting` chat with system messages
only.
- HTTP: empty create + first message (`W -> R0`, inserts directly, not
queued), immediate archive of an idle chat, workspace file upload
against an empty-created chat, and title generation on the first
message.
2026-09-27 16:38:30 +02:00
Michael Suchacz 5dde49dffb feat: add chat workspace file upload endpoint (#27079)
## What

Adds `POST /api/v2/chats/{chat}/workspace-files`, which streams the
request body to the chat's bound workspace agent and returns the final
path/name/size, plus the `workspace-file-reference` message part type
that carries the uploaded file's metadata through chat messages:

- `coderd/exp_chats.go`: owner-only middleware (chat RBAC update +
reject archived), workspace exec authorization (403/409 like the
existing chat exec paths), agent selection (prefer the chat's bound
agent, else deterministic `agentselect.FindChatAgent`, without
persisting a binding), 30s dial timeout, chat/ancestor tracking headers
on the agent connection, and agent error passthrough (agent HTTP status
preserved, 502 with a generic detail for transport failures; the real
error is logged). Deleted and non-running workspaces get a specific 409
("Workspace is stopped. Start the workspace before uploading files.")
before agent lookup. Each failed upload logs one structured warning, and
`coderd_chat_workspace_upload_total{status}` counts outcomes. The route
shares the files rate limit and documents its 429.
- Input validation: client-supplied `workspace-file-reference` parts
must point inside `/.coder/chats/<chat-id>/files/` with a matching
basename, non-negative size, and a `workspace_file_workspace_id` equal
to the chat's currently bound workspace (the upload response echoes it
as `workspace_id`). References uploaded before a workspace rebind are
rejected instead of silently sending the agent an unreadable path. The
file name must already be in sanitized form
(`SanitizeWorkspaceUploadName(name) == name`), and the cleaned path and
base media type are what gets persisted; message edits share the same
validation. Parts are rejected on chat creation (no chat ID exists yet).
- `coderd/x/chatd/chatprompt`: references render into the prompt as text
only, `[workspace file: <name> (<size>) at <path>]`; file bytes never
reach the LLM. Title derivation (`TitleText`) uses the bare file name,
so fallback titles carry no internal marker.
- `codersdk`: part-type constants/fields,
`ChatMessageWorkspaceFileReference` builder, and
`Client.UploadChatWorkspaceFile` (RFC 5987 filename in
`Content-Disposition`).

No DB migration: parts persist as JSON in `chat_messages.content`.

## Why

Bridges chat and the workspace filesystem for CODAGT-211: users drop a
file in chat, the bytes land where the agent's tools can operate on
them, and the model learns the path from the reference part.

## How tested

- `go test ./coderd -run 'WorkspaceFile|ChatInput|UploadChat'` including
an integration test that runs a real in-memory agent, uploads through
the coderd route, verifies bytes on disk, and exercises collision
suffixes.
- `go test ./codersdk ./coderd/x/chatd/...`, `make gen`
(swagger/types/docs), `make lint`.
- Rebased onto main 2026-09-21: the chat API moved from
`/api/experimental` to `/api/v2`, so the route is registered in
`coderd/chat_routes.go` and the SDK method lives on `codersdk.Client`.

## Follow-ups

- The files rate limit counts requests, not bytes or concurrency;
whether this route should use a per-user concurrency cap instead, and
whether the new-chat page should keep partial successes on a 429, is
still open
([CODAGT-1171](https://linear.app/codercom/issue/CODAGT-1171)).

Part of CODAGT-211. Stack: agent API -> coderd endpoint (this PR) -> UI.

> This PR was authored by Mux (AI) working on Mike's behalf.
2026-09-26 21:41:25 +02:00
david-fraley 282365b23a feat: report clicks on the workspace build debug action to telemetry (#29853) 2026-09-25 13:59:53 -05:00
Susana Ferreira 46ccaf3764 chore: mark organization AI spend users endpoint as experimental (#29842)
## Description

Move `GET /organizations/{organization}/ai/spend/users` under
`/api/experimental` so the per-user spend report is not part of the
stable API for this release. The endpoint behavior is unchanged.

Related to [internal Slack
thread](https://codercom.slack.com/archives/C04M9CNGHGF/p1790190171687059?thread_ts=1790190121.005749&cid=C04M9CNGHGF).

## Changes

- Register the route on the experimental handler and mark it
`@x-apidocgen {"skip": true}`, which removes it from the generated API
reference.
- Move the Go SDK method to `ExperimentalClient` and the frontend method
to `API.experimental`.
- Drop the docs link to the removed API reference section. The link is
commented out with a TODO so it can be restored later.

User-facing docs for the **User spend** page are updated upstack in
#29844.

> [!NOTE]
> Generated by Coder Agents on behalf of @ssncferreira.
2026-09-25 17:35:02 +01:00